Steckschlüssel（Application：Für Handarbeiten Seite 3）
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
Kugelgelenk, BJ30
MAEDAKINNZOKU
Attachment for the socket wrench which is connected between the handle and the socket to make work at angles easier.
[Features]
· Ball-shaped and the rotation is very smooth.
· Since the angle is inclined by about 30°, it is possible to work in a place with height restrictions and obstacles.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.› Jetzt konfigurierenab∗ ： 24.68 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Sechskanteinsatz, Kugelkopf, 3BH
MAEDAKINNZOKU
Socket for tightening and loosening hex socket bolts and hex socket set screws.
[Features]
· In this socket, various strength-enhancing alloy elements are blended; the addition of complete heat treatment raises alloy performance to the limit.
· The tip has been given a ball point finish, enabling quick turning and temporary tightening from a 30° tilt angle.
· The knurled outer periphery allows the bolt to be easily turned by hand.
· Ultra-long type makes it possible to access places that could not be reached otherwise.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.› Jetzt konfigurierenab∗ ： 9.29 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Ratschengriff (nur Kopf) , 572
MAEDAKINNZOKU
Standard oval ratchet handle.
[Features]
· 25.4 mm drive.
· Can be used as a ratchet handle by fitting handle 113.
· Oval type/24-gear.
· Claw type switching provides excellent durability.
· For tightening/loosening of large diameter bolts and nuts.
[Applications]
· Ideal for assembly and maintenance of large industrial machinery and cars.› Jetzt konfigurierenab∗ ： 142.72 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Ratschengriff (Halterausführung) , RH33K
MAEDAKINNZOKU
9.5 mm insertion angle square ratchet handle.
[Features]
· Easy attaching and detaching of socket, and comes with socket holder unlikely to detach while working.
· Socket can be replaced with one-push operation.
[Applications]
Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.› Jetzt konfigurierenab∗ ： 56.21 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Oszillierende Verlängerung, EX31
MAEDAKINNZOKU
An extension bar used to extend a socket when operation with a handle is difficult in deep and narrow places.
[Features]
· Used to extend a socket when operation with a handle is not easy in a deep and narrow place or the like.
· Convex drive has been spherically machined, allowing it to be used even when tilted by 10°.
· 9.5 mm drive.
· In response to demand, more sizes have been added: now available in 5 types with overall length ranging from 32 to 400 mm.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.› Jetzt konfigurierenab∗ ： 11.67 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Oszillierende Verlängerung, EX21
MAEDAKINNZOKU
A swiveling extension bar used to extend a socket when the handle is difficult to operate.
[Features]
· Convenient when working in deep and narrow places.
· Convex drive has been spherically machined, allowing it to be used even when tilted by 10°.
· Various extension sizes are required for work in deep and narrow areas.
· Three types are available, from 28 to 75 mm in total length.
[Applications]
· Ideal for assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.› Jetzt konfigurierenab∗ ： 10.99 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Oszillierende Verlängerung, EX41
MAEDAKINNZOKU
An extension bar used to extend a socket when operation with a handle is difficult in deep and narrow places.
[Features]
· Used to extend a socket when operation with a handle is not easy in a deep and narrow place or the like.
· Convex drive has been spherically machined, allowing it to be used even when tilted by 10°.
· 12.7 mm drive.
· In response to demand, more sizes have been added: now available in 5 types with overall length ranging from 75 to 400 mm.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.› Jetzt konfigurierenab∗ ： 17.91 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
ab∗ ： 165.44 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
SUS-Verlängerung, SEX30-075
MAEDAKINNZOKU
Extension bar featuring durability and rust resistance.
[Features]
· 9.5 mm drive. Total length: 75 mm.
· This stainless steel tool adopts precipitation hardened stainless steel that emphasizes strength and is rust resistant, and has excellent corrosion resistance, chemical resistance and hygienic properties.
[Applications]
· Food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development, plants, waterproofing construction, and plumbing work.
· Ideal for places that use stainless steel bolts and nuts such as cleaning equipment.› Jetzt konfigurierenab∗ ： 72.52 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
SUS-Sechskanteinsatz, S3H
MAEDAKINNZOKU
Stainless steel hexagon socket featuring durability and rust resistance.
[Features]
· 9.5 mm drive.
· This stainless steel tool adopts precipitation hardened stainless steel that emphasizes strength and is rust resistant, and has excellent corrosion resistance, chemical resistance and hygienic properties.
[Applications]
· Food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development, plants, waterproofing construction, and plumbing work.
· Ideal for places that use stainless steel bolts and nuts such as cleaning equipment.› Jetzt konfigurierenab∗ ： 61.70 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Verlängerung, EX80 / 612 / 613
MAEDAKINNZOKU
Used to extend a socket when operation with a handle is not easy in a deep and narrow place or the like.› Jetzt konfigurierenab∗ ： 77.79 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Griffversatz, 301
MAEDAKINNZOKU
Handle with an angle screwdriver attached to the L-type tip.
[Features]
· 12.7 mm insertion angle.
· Convenient for heavy-duty tightening and loosening work when the socket is attached to the tip such as in machine maintenance.
· Convenient wrench that can be used to hold various sockets.
[Applications]
· Ideal for assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.› Jetzt konfigurierenab∗ ： 26.46 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Querstange, 113
MAEDAKINNZOKU
A socket wrench equipped for use with ratchet handle 572, which is used as the ratchet handle.
[Features]
· Used for handle for ratchet handle 572 and handle for T type slide handle 416.
· Attach with T slide handle 416 for use as a T-shaped slide handle.
[Applications]
· For assembly and maintenance of large machines and maintenance of large automobiles.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 83.26 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckschlüsseleinsätze (Zwölfkant) , 6D
MAEDAKINNZOKU
Socket for tightening and loosening hex bolts and nuts.
[Features]
· Insertion angle: 19 mm.
· Double hexagonal subtense design which can easily access hex bolts and nuts.
· By minimizing subtense tolerance, rattling when inserting the bolt/nut has been decreased.
· Increases tightening efficiency, improves operability, and enables safe work.
· A standard type socket for wrench sockets.
[Applications]
· Ideal for assembly of large industrial machinery and maintenance of cars.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 16.09 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Steckadapter, 38
MAEDAKINNZOKU
Socket adapter that connects sockets and handles of differing insertion angles.
[Features]
· Concave 6.35 mm x Convex 9.5 mm.
· Firmly connects sockets and handles of differing insertion angles.
· Manual attachment tool.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.› Jetzt konfigurierenab∗ ： 11.06 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckschlüsselsatz, 1850M
MAEDAKINNZOKU
Socket wrench set actively used for maintenance and installation of small machines and bicycles.
[Features]
· New metal case and durable satin tray adopted.
· Includes a new ratchet handle with 72-tooth gears, providing greater usability and work efficiency.
· Includes 8 sockets and 3 handles.
[Applications]
· For assembly of industrial machinery, and maintenance work of automobiles, motorcycles and bicycles.
· Ideal for installation of small machines, etc.› Jetzt konfigurierenab∗ ： 138.86 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Tiefer Einsatz (Sechskant)
MAEDAKINNZOKU
Long type socket with compact design that can be used for work in narrow places.
[Features]
· Total length: 51 mm.
· Hex subtense with good access to hexagon bolts and nuts.
· Compact design that's convenient for work in narrow areas.
[Applications]
· For work with long and extra-long bolts in piping, wiring, and long deep narrow spaces.
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
· For hexagon bolt/nut tightening and loosening work.› Jetzt konfigurierenab∗ ： 10.55 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Tiefer Einsatz (Sechskant) , 4S
MAEDAKINNZOKU
Long type socket for tightening and loosening hex bolts and nuts.
[Features]
· Total length: 83 mm.
· Insertion angle: 12.7 mm.
· Hex subtense with good access to hexagon bolts and nuts.
· Demonstrates power in tightening nuts in deep areas and protruding bolts/nuts.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 14.78 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Sechskant-Steckschlüsselsatz, H2072
MAEDAKINNZOKU
9-piece set for hand tools with an insertion angle of 6.35 mm.
[Features]
· New metal case and durable satin tray adopted.
· Includes a new ratchet handle with 72-tooth gears, further enhancing the set contents.
· A standard set of hexagon socket x 7 and handle x 2.
[Applications]
· Ideal for assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.› Jetzt konfigurierenab∗ ： 133.04 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Gemischter Steckschlüsselsatz
MAEDAKINNZOKU
Mixed set of 9.5 mm sq. drive type standard sockets, deep sockets and hexagon sockets.
[Features]
· A carefully selected tool essential for the maintenance of industrial machinery and automobiles, etc.
· Very convenient for tightening and loosening of small bolts and nuts in narrow places.
· New metal case, durable satin tray, new type ratchet handle adopted.
[Applications]
· Ideal for assembly and maintenance work of industrial machinery and electronic equipment.
· Ideal for assembly and maintenance work of automobiles, motorcycles and bicycles.
· Ideal for tightening and loosening hex bolts, hex socket head bolts, etc.› Jetzt konfigurierenab∗ ： 246.18 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Ratschengriff (Halterausführung) , RH43K
MAEDAKINNZOKU
12.7 mm insertion angle square ratchet handle.
[Features]
· Easy attaching and detaching of socket, and comes with socket holder unlikely to detach while working.
· Socket can be replaced with one-push operation.
[Applications]
Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.› Jetzt konfigurierenab∗ ： 50.88 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
ab∗ ： 234.00 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
T-förmiger Gleitgriff, SL30
MAEDAKINNZOKU
A T-type slide handle for square drive that slides over the handle and can be adjusted to any position.
[Features]
· A groove is processed on the handle so that the square drive does not turn when force is applied.
· 9.5 mm insertion angle.
[Applications]
· Ideal for assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.› Jetzt konfigurierenab∗ ： 18.46 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
T-förmiger Griff, TH2250
MAEDAKINNZOKU
Convenient T-shaped handle with an angular drive attached to the tip of the T-shape which allows sockets of various sizes to be replaced
[Features]
· T type handle allows smooth access to bolts and nuts for fastening and loosening work.
· 6.35 mm insertion angle.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 22.33 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Verlängerung, EX20 / 206 / 207
MAEDAKINNZOKU
Extension bar available in 9 types. (6.35 insertion)
[Features]
· For when operation with a handle is not easy, in a deep and narrow place or the like.
· Various extension sizes are required for work in deep and narrow areas.
· Sizes requested by our customers have been added for a rich lineup of 9 types from 28 to 600 mm.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.› Jetzt konfigurierenab∗ ： 7.42 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Verlängerung, EX30 / 305 / 306 / 307
MAEDAKINNZOKU
Extension bar convenient for extension of sockets. (9.5 insertion)
[Features]
· For when operation with a handle is not easy, in a deep and narrow place or the like.
· Various extension sizes are required for work in deep and narrow areas.
· Sizes requested by our customers have been added for a rich lineup of 12 types from 32 to 1,000 mm.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.› Jetzt konfigurierenab∗ ： 9.04 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Schnelladapter, QA-03
MAEDAKINNZOKU
A quick turning adapter mounted between a ratchet handle and socket.
[Features]
· 9.5 mm drive.
· Quick turning is possible by hand by attaching between the ratchet handle and socket.
· Co-spinning of nuts and bolts is prevented by pressing on the quick adapter when spinning the ratchet handle.
[Applications]
· Ideal for assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.› Jetzt konfigurierenab∗ ： 11.94 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Einsätze (Achtkant) , 3E
MAEDAKINNZOKU
An octagonal socket with a shape that makes it easy to access bolts and nuts during tightening and loosening work. (9.5 insertion)
[Features]
· Double square (octagon) type that makes it easy to access square bolts and nuts.
· Improves work efficiency when tightening and loosening square nuts and bolts.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.› Jetzt konfigurierenab∗ ： 8.70 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Steckadapter, 138
MAEDAKINNZOKU
Manual attachment tool.
[Features]
· Firmly connects sockets and handles of differing insertion angles.
· For manual operation.
[Applications]
· Ideal for assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.› Jetzt konfigurierenab∗ ： 22.41 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckadapter, 158
MAEDAKINNZOKU
Attachment tool that connects sockets and handles of differing insertion angles.
[Features]
· Can firmly connect sockets and handles of differing insertion angles.
· For manual operation.
[Applications]
Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.› Jetzt konfigurierenab∗ ： 42.89 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckadapter, 58
MAEDAKINNZOKU
Manual attachment tool that connects sockets and handles of differing insertion angles.
[Applications]
· Can firmly connect sockets and handles of differing insertion angles.
· Cannot be used with electric tools such as impact wrenches.
· Critical torque of the adapter is based on the smaller square drive.
· Concave 9.5 x convex 12.7 mm.
[Applications]
· Convenient for assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.› Jetzt konfigurierenab∗ ： 12.46 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckschlüsselsatz, 1570M
MAEDAKINNZOKU
Standard type socket wrench set used for tightening and loosening hex bolts and nuts.
[Features]
· Double hexagonal subtense design which can easily access hex bolts and nuts.
· By minimizing subtense tolerance, rattling when inserting the bolt/nut has been decreased, increasing tightening efficiency.
· Demonstrates good and safe operability.
· New metal case and durable satin tray adopted.
· Includes a new ratchet handle with 72-tooth gears, providing greater usability and work efficiency.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.› Jetzt konfigurierenab∗ ： 175.17 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Schraubendreher-Bit-Einsatz, 3H-M2
MAEDAKINNZOKU
Flathead screwdriver bit socket for hand tools with an insertion angle of 9.5 mm.
[Features]
· The knurled outer periphery allows the bolt to be easily turned by hand.
· For flathead screw, tip standard: -0.8 x 6.0.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.› Jetzt konfigurierenab∗ ： 8.50 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Schraubendreher-Bit-Einsatz, 4H-M2
MAEDAKINNZOKU
Flathead screwdriver bit socket for hand tools with an insertion angle of 12.7 mm.
[Features]
· The knurled outer periphery allows the bolt to be easily turned by hand.
· For flathead screw, tip standard: -0.8 x 6.0.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.› Jetzt konfigurierenab∗ ： 11.33 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Schraubendreher-Bit-Einsatz, 4H-P
MAEDAKINNZOKU
Phillips screwdriver bit socket for hand tools with an insertion angle of 12.7 mm
[Features]
· The knurled outer periphery allows the bolt to be easily turned by hand.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.› Jetzt konfigurierenab∗ ： 10.91 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Sechskanteinsatz, 3H
MAEDAKINNZOKU
Hexagonal socket for hand tools with an insertion angle of 9.5 mm.
[Features]
· Hex socket ideal for tightening and loosening work.
· Various strength-enhancing alloy elements are blended.
· Complete heat treatment has been applied to raise alloy performance to the limit.
· The knurled outer periphery allows the bolt to be easily turned by hand.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.› Jetzt konfigurierenab∗ ： 5.73 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Sechskanteinsatz, 4H
MAEDAKINNZOKU
Hexagonal socket for hand tools with an insertion angle of 12.7 mm.
[Features]
· Various strength-enhancing alloy elements are blended.
· Complete heat treatment has been applied to raise alloy performance to the limit.
· The knurled outer periphery allows the bolt to be easily turned by hand.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.› Jetzt konfigurierenab∗ ： 7.54 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Universalgelenk, 408
MAEDAKINNZOKU
Universal attachment with 19.0 mm insertion angle.
[Features]
· Used for complicated locations where the task cannot be done in a straight line.
· Connect between the handle and socket to work at an angle.
· Angle: Max 75°.
[Applications]
· For assembly and maintenance of large machines as well as automobile, motorcycle, and bicycle maintenance work.› Jetzt konfigurierenab∗ ： 78.40 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Universalgelenk, 608
MAEDAKINNZOKU
Universal attachment with 25.4 mm insertion angle.
[Features]
· Used for complicated locations where the task cannot be done in a straight line.
· Connect between the handle and socket to work at an angle.
· Angle: Max 75°.
[Applications]
· For assembly and maintenance of large machines as well as automobile, motorcycle, and bicycle maintenance work.› Jetzt konfigurierenab∗ ： 113.43 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Ratschengriff, 371
MAEDAKINNZOKU
Standard oval easy-to-use ratchet handle.
[Features]
· A handle for socket wrenches.
· Oval type/20-gear.
· Claw type switching provides excellent durability.
[Applications]
· Ideal for assembly and maintenance work of industrial machinery.› Jetzt konfigurierenab∗ ： 55.29 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Ratschengriff (Halterausführung) , RH23K
MAEDAKINNZOKU
Ratchet handle with easy attaching and detaching of socket, which comes with socket holder unlikely to detach while working.
[Features]
· Socket can be replaced with one-push operation.
· 6.35 mm insertion angle square ratchet handle.
[Applications]
· Ideal for assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.› Jetzt konfigurierenab∗ ： 48.01 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Langer Sechskanteinsatz, 3H-L
MAEDAKINNZOKU
A socket wrench ideal for tightening and loosening hexagon socket head cap screws and hexagon socket locking screws in deep and narrow places.
[Features]
· Long hexagonal socket for manual work with a 9.5-mm insertion angle.
· As it is a long type, it can be used to access hex socket bolts and set screws in deep and narrow places.
· For manual use but designed to withstand high torques.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.› Jetzt konfigurierenab∗ ： 10.02 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckschlüsselsatz, H4100MP
MAEDAKINNZOKU
Hex socket set ideal for tightening and loosening work.
[Features]
· Includes a new ratchet handle with 72-tooth gears. Comprehensive contents improve the work efficiency.
· The socket is made of various alloys that increase strength.
· Complete heat treatment has been applied to raise alloy performance to the limit.
· Uses a light and easy to carry resin case with emphasis on "function and design".
· Design to have vertical and horizontal freedom, permitting use regardless of location. Stacking functionality allows stacking.
· Luxurious metal latch in logo style. Durable hinge pin is adopted. Easy to carry concave shape.
[Applications]
· Ideal for assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.› Jetzt konfigurierenab∗ ： 173.12 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
ab∗ ： 12.35 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Ratschengriff, Buchsen-Ausführung
SUPER TOOL
A convenient mechanism that does not easily fall off when a socket is attached. A single-touch operation via push button› Jetzt konfigurierenab∗ ： 35.69 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit |
| Single Product/Set Classification |
| Application |
| Insertion Angle (Shaft measurement when electric drill) (mm) |
| Socket shape |
| Width across flat dimension (S Measurement) |
| Insertion Angle (Shaft measurement when electric drill) (Inch) |
| Overall length (L dimension)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | LOBTEX | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | LOBTEX | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | SUPER TOOL | SUPER TOOL |
| Artikelserie | |||||||||||||||||||||||||||||||||||||||||||||
| ab∗ | 24.68 € *Stückpreis Standardkonfiguration | 9.29 € *Stückpreis Standardkonfiguration | 142.72 € *Stückpreis Standardkonfiguration | 56.21 € *Stückpreis Standardkonfiguration | 11.67 € *Stückpreis Standardkonfiguration | 10.99 € *Stückpreis Standardkonfiguration | 17.91 € *Stückpreis Standardkonfiguration | 165.44 € *Stückpreis Standardkonfiguration | 72.52 € *Stückpreis Standardkonfiguration | 61.70 € *Stückpreis Standardkonfiguration | 77.79 € *Stückpreis Standardkonfiguration | 26.46 € *Stückpreis Standardkonfiguration | 83.26 € *Stückpreis Standardkonfiguration | 16.09 € *Stückpreis Standardkonfiguration Mengenrabatt | 11.06 € *Stückpreis Standardkonfiguration | 138.86 € *Stückpreis Standardkonfiguration | 10.55 € *Stückpreis Standardkonfiguration | 14.78 € *Stückpreis Standardkonfiguration Mengenrabatt | 133.04 € *Stückpreis Standardkonfiguration | 246.18 € *Stückpreis Standardkonfiguration | 50.88 € *Stückpreis Standardkonfiguration | 234.00 € *Stückpreis Standardkonfiguration | 18.46 € *Stückpreis Standardkonfiguration | 22.33 € *Stückpreis Standardkonfiguration Mengenrabatt | 7.42 € *Stückpreis Standardkonfiguration | 9.04 € *Stückpreis Standardkonfiguration | 11.94 € *Stückpreis Standardkonfiguration | 8.70 € *Stückpreis Standardkonfiguration | 22.41 € *Stückpreis Standardkonfiguration | 42.89 € *Stückpreis Standardkonfiguration | 12.46 € *Stückpreis Standardkonfiguration | 175.17 € *Stückpreis Standardkonfiguration | 8.50 € *Stückpreis Standardkonfiguration | 11.33 € *Stückpreis Standardkonfiguration | 10.91 € *Stückpreis Standardkonfiguration | 5.73 € *Stückpreis Standardkonfiguration | 7.54 € *Stückpreis Standardkonfiguration | 78.40 € *Stückpreis Standardkonfiguration | 113.43 € *Stückpreis Standardkonfiguration | 55.29 € *Stückpreis Standardkonfiguration | 48.01 € *Stückpreis Standardkonfiguration | 10.02 € *Stückpreis Standardkonfiguration | 173.12 € *Stückpreis Standardkonfiguration | 12.35 € *Stückpreis Standardkonfiguration | 35.69 € *Stückpreis Standardkonfiguration |
| Minimum Lieferzeit | 5 Arbeitstage | 5 Arbeitstage | 9 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 9 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 9 Arbeitstage | 9 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | Versand am selben Tag | 5 Arbeitstage | 5 Arbeitstage | 9 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | 9 Arbeitstage | 9 Arbeitstage | 9 Arbeitstage | 5 Arbeitstage | 9 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 9 Arbeitstage | 9 Arbeitstage | 5 Arbeitstage | 9 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | Versand am selben Tag |
| Single Product/Set Classification | Einzelstück Universalgelenk | Einzelstück Nuss | Einzelstück Griff | Einzelstück Griff | Einzelstück Verlängerungsstange | Einzelstück Verlängerungsstange | Einzelstück Verlängerungsstange | Produktsatz | Einzelstück Verlängerungsstange | Einzelstück Nuss | Einzelstück Verlängerungsstange | Einzelstück Griff | Einzelstück Griff | Einzelstück Nuss | Einzelstück Adapter | Produktsatz | Einzelstück Nuss | Einzelstück Nuss | Produktsatz | Produktsatz | Einzelstück Griff | Produktsatz | Einzelstück Griff | Einzelstück Griff | Einzelstück Verlängerungsstange | Einzelstück Verlängerungsstange | Einzelstück Adapter | Einzelstück Nuss | Einzelstück Adapter | Einzelstück Adapter | Einzelstück Adapter | Produktsatz | Einzelstück Nuss | Einzelstück Nuss | Einzelstück Nuss | Einzelstück Nuss | Einzelstück Nuss | Einzelstück Universalgelenk | Einzelstück Universalgelenk | Einzelstück Griff | Einzelstück Griff | Einzelstück Nuss | Produktsatz | Einzelstück Griff | Einzelstück Griff |
| Application | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten | Für Handarbeiten |
| Insertion Angle (Shaft measurement when electric drill) (mm) | 9.5 | 9.5 | 25.4 | 9.5 | 9.5 | 6.35 | 12.7 | 12.7 | 9.5 | 9.5 | 25.4 | 12.7 | - | 19 | 6.35 | 6.35 | 6.35 | 12.7 | 6.35 | 9.5 | 12.7 | 12.7 | 9.5 | 6.35 | 6.35 | 9.5 | 9.5 | 9.5 | 19.0 concave x 12.7 convex | 25.4 | 9.5 | 9.5 | 9.5 | 12.7 | 12.7 | 9.5 | 12.7 | 19 | 25.4 | 12.7 | 6.35 | 9.5 | 12.7 | 12.7 | 12.7 |
| Socket shape | Verbindertyp | Sechskant für Innensechskantschraube | - | - | Verbindertyp | Verbindertyp | Verbindertyp | 12 Sq. | Verbindertyp | Sechskant für Innensechskantschraube | Verbindertyp | - | - | 12 Sq. | Verbindertyp | 6 Sq. | 6 Sq. | 6 Sq. | Sechskant/Gelenke/Kreuzschlitz (+)/Schlitz (-) für Innensechskantschraube | Sechskant/Doppelsechskant/Gelenke/Sechskantschraube mit Innensechskant | - | 12 Sq. | - | - | Verbindertyp | Verbindertyp | Verbindertyp | 8 Sq. | Verbindertyp | Verbindertyp | Verbindertyp | Sechskant/Doppelsechskant/Gelenke | Senkkopf (-) | Senkkopf (-) | Kreuzschlitz (+) | Sechskant für Innensechskantschraube | Sechskant für Innensechskantschraube | Verbindertyp | Verbindertyp | - | - | Sechskant für Innensechskantschraube | 6 Sq. | - | - |
| Width across flat dimension (S Measurement) | 9.5 | 3 ～ 10 | - | - | 9.5 | 6.35 | 12.7 | 10 ～ 24 | 9.5 | 2.5 ～ 12 | - | - | - | 17 ～ 65 | - | 5 ～ 13 | 3 ～ 14 | 8 ～ 33 | 3 ～ 8 | 3 ～ 22 | - | 10 ～ 30 | - | - | 6.35 | 9.5 | - | 5.5 ～ 13 | - | - | 9.5 | 5.5 ～ 24 | - | - | - | 2.5 ～ 12 | 3 ～ 22 | - | - | - | - | 3 ～ 12 | 3 ～ 19 | - | - |
| Insertion Angle (Shaft measurement when electric drill) (Inch) | 3/8 | 3/8 | 1 | 3/8 | 3/8 | 1/4 | 1/2 | 1/2 | 3/8 | 3/8 | 1 | 1/2 | - | 3/4 | 1/4 | 1/4 | 1/4 | 1/2 | 1/4 | 3/8 | 1/2 | 1/2 | 3/8 | 1/4 | 1/4 | 3/8 | 3/8 | 3/8 | 3/4 | 1 | 3/8 | 3/8 | 3/8 | 1/2 | 1/2 | 3/8 | 1/2 | 3/4 | 1 | 1/2 | 1/4 | 3/8 | 1/2 | - | - |
| Overall length (L dimension)(mm) | 44 | 75 | 165 | 182 | 32 ～ 400 | 28 ～ 75 | 75 ～ 400 | - | 75 | 40 ～ 61 | 150 ～ 400 | 275 | 660 | 50 ～ 83 | 23 | - | 51 | 83 | - | - | 255 | - | 200 | 250 | 28 ～ 600 | 32 ～ 1000 | 30 | 27 ～ 29 | 46 | 61 | 32 | - | 52 | 57 | 57 ～ 61 | 40 ～ 63 | 49 ～ 80 | 104 | 128.3 | 270 | 140 | 100 | - | 250 | 257 |
Loading...
Filtern nach:
Lagerbestand
-
- Nur Lagerteile anzeigen
-
Single Product/Set Classification
- Produktsatz
- Einzelstück Nuss
- Einzelstück Griff
- Einzelstück sonstige
- Einzelstück Adapter
- Einzelstück Verlängerungsstange
- Einzelne dazugehörige Komponenten
- Einzelstück Universalgelenk
- Set mit dazugehörigen Komponenten
-
Application
-
Für Handarbeiten
-
Für Schläge
-
Für Elektrobohrer
-
Verbindungselement für Handarbeitsausführung
-
Schlaggelenke
-
Für Schläge/Schlaggelenke
-
Für Handarbeit/Schläge/Schlaggelenk für Handarbeitsausführung
-
Für Handarbeit/Gelenk für Handarbeitsausführung
-
Für Handarbeit/Schläge
-
Für Handarbeiten
-
Insertion Angle (Shaft measurement when electric drill) (mm)
-
Socket shape
- 4 Sq.
- 6 Sq.
- 8 Sq.
- 12 Sq.
- Doppelsechskant/Gelenke
- Hahn
- Kreuzschlitz (+)
- Schraube
- Sechskant für Innensechskantschraube
- Sechskant/Doppelsechskant
- Sechskant/Doppelsechskant/Gelenke
- Sechskant/Doppelsechskant/Gelenke/Sechskantschraube mit Innensechskant
- Sechskant/Gelenke
- Sechskant/Gelenke für Innensechskantschraube
- Sechskant/Gelenke/Kreuzschlitz (+)/Schlitz (-) für Innensechskantschraube
- Sechskantbit
- Senkkopf (-)
- Spezial
- Verbindertyp
- 4 Sq.
-
Width across flat dimension (S Measurement)
- 1
- 1-13/16
- 1-11/16
- 1-9/16
- 1-7/8
- 1-7/16
- 1-5/8
- 1-5/16
- 1-3/4
- 1-3/8
- 1-3/16
- 1-1/2
- 1-1/4
- 1-1/8
- 1-1/16
- 1/2
- 1/4
- 1/8
- 1.5 mm
- 1.65
- 1.8 mm
- 2
- 2 mm
- 2-3/16
- 2-1/4
- 2-1/8
- 2.3
- 2.48
- 2.5
- 2.5 mm
- 2.72
- 3
- 3 mm
- 3/4
- 3/8
- 3/16
- 3/32
- 3.2
- 3.2 mm
- 3.26
- 3.5 mm
- 3.83
- 3.84
- 4
- 4 mm
- 4.4
- 4.5
- 4.5 mm
- 4.72
- 4.96
- 5
- 5 mm
- 5/8
- 5/16
- 5/32
- 5.49
- 5.5
- 5.5 mm
- 5.69
- 6
- 6 mm
- 6,1
- 6.17
- 6.3
- 6.35
- 6.6
- 7
- 7 mm
- 7/8
- 7/16
- 7/32
- 7.47
- 7.77
- 08
- 8
- 8 mm
- 8,1
- 8.79
- 09
- 9
- 9 mm
- 9/16
- 9/32
- 9/64
- 9.37
- 9.5
- 10
- 10 mm
- 10,1
- 10.03
- 11
- 11 mm
- 11/16
- 11/32
- 11.12
- 11.17
- 12
- 12 mm
- 12,2
- 12.7
- 12.85
- 13
- 13 mm
- 13/16
- 13.2
- 14
- 14 mm
- 14,2
- 14.5
- 14.71
- 15
- 15 mm
- 15/16
- 15.49
- 16
- 16,2
- 16&17
- 16.64
- 17
- 17/32
- 17.5
- 18
- 18.41
- 19
- 19/24
- 19/32
- 20
- 20.8
- 21
- 22
- 22.10
- 23
- 24
- 24,26
- 25
- 25/32
- 25.4
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 38.1
- 40
- 41
- 42
- 46
- 50
- 52
- 54
- 55
- 58
- 60
- 63
- 65
- 67
- 70
- 71
- 75
- 77
- 80
- 85
- 90
- 95
- 100
-
Insertion Angle (Shaft measurement when electric drill) (Inch)
-
Overall length (L dimension)(mm)
- 9
- 10
- 15
- 16
- 17.4
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 23
- 23.5
- 23.9
- 24
- 25
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- 30.5
- 31.5
- 31.6
- 32
- 32.5
- 33
- 33.5
- 34
- 34.5
- 35
- 35.5
- 36
- 36.5
- 36.6
- 36.8
- 37
- 37.1
- 37.3
- 37.5
- 38
- 38.2
- 39
- 39.5
- 40
- 40.5
- 41
- 42
- 42.5
- 43
- 43.5
- 44
- 44.4
- 45
- 46
- 46.5
- 47
- 48
- 49
- 50
- 50.5
- 51
- 51.5
- 52
- 53
- 53.5
- 54
- 54.5
- 55
- 56
- 57
- 58
- 59
- 59.5
- 60
- 60.5
- 60.6
- 61
- 62
- 62.4
- 63
- 64
- 65
- 66
- 66.5
- 67
- 68
- 69
- 70
- 71
- 73
- 73.3
- 73.5
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 82.5
- 83
- 83.5
- 84
- 85
- 85.5
- 86
- 87
- 87.5
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 97
- 100
- 101
- 104
- 105
- 108
- 109
- 110
- 112
- 115
- 120
- 121.5
- 122
- 123
- 125
- 128
- 128.3
- 130
- 132
- 135
- 136
- 137
- 138
- 140
- 145
- 147
- 150
- 154
- 155
- 157
- 160
- 165
- 168
- 170
- 172
- 175
- 178
- 180
- 182
- 185
- 186
- 190
- 194
- 195
- 198
- 199
- 200
- 202
- 210
- 215
- 219
- 223
- 224
- 227
- 230
- 235
- 237
- 240
- 245
- 248
- 250
- 252
- 253
- 254
- 254.5
- 255
- 255.5
- 256
- 257
- 260
- 262
- 265
- 270
- 275
- 276
- 277
- 280
- 285
- 290
- 298
- 300
- 304
- 306
- 307
- 308
- 310
- 312.5
- 315
- 320
- 322
- 328
- 330
- 331
- 350
- 351
- 355
- 360
- 365
- 375
- 380
- 395
- 396
- 400
- 402
- 450
- 472
- 500
- 505
- 508
- 565
- 575
- 600
- 650
- 654
- 660
- 698
- 700
- 701
- 720
- 787
- 990
- 1000
- 1049.5
Marke
-
- MAEDAKINNZOKU (190)
- KTC(KYOTO TOOL) (96)
- KO-KEN TOOL (37)
- TRUSCO NAKAYAMA (24)
- HAZET (22)
- ASAHI METAL INDUSTRY (14)
- LOBTEX (9)
- MITOLOY (8)
- SK 11 (5)
- SUEKAGE TOOL (5)
- WERA (5)
- ENGINEER (4)
- NEPROS (3)
- SUPER TOOL (3)
- HOZAN (2)
- H & H (1)
- SMATO (1)
- SIGNET (1)
- ANEX (0)
- PROXXON MICROMOT (0)
- BAHCO (0)
- WIHA (0)
- WEIDMÜLLER (0)
- CIMCO (0)
- FACOM (0)
- VESSEL (0)
- AMF (0)
- KIPP (0)
- MATADOR (0)
- GEDORE (0)
- SKF (0)
- FAG (0)
- NAGAHORI INDUSTRY (0)
- BERNSTEIN AG (0)
CAD Format
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Steckschlüssel
-
- Ratschenschlüssel / Ringschlüssel / Schraubenschlüssel
- Steckschlüssel
- Dosensenker
- Innensechskantschlüssel
- Sechsrund-Schlüssel (TX/E)
- Schraubendreher
- Bits für Schraubendreher / Schraubendrehereinsätze
- Drehmomentschlüssel
- Drehmomentschrauber
- Blechbearbeitung
- Zangen / Kneifzangen / Pinzetten
- Universalschlüssel
- Werkzeuge für Wasserversorgungs-/Klimaleitungen
- Schneidwerkzeuge
- Isolierwerkzeuge
- Werkzeuge für Elektroanlagen
- Hämmer
- Meißel
- Gravierwerkzeuge/Stanzen
- Werkzeug-Sets/Werkzeugkästen
- Cutter, Rollschneider, Skalpellmesser
- Stemmeisen / Hebel
- Auszieher
- Pinzetten, Klemmen, Zangen
- Fahrzeug-Wartungswerkzeuge
- Stemmwerkzeuge
-
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.