Halter für optische Geräte

?* Informationen zur Lieferzeit und Preisen

• 

  Kamerahalterung

  CHUO PRECISION INDUSTRIAL

  [Features]
  · HC-T3 and HC-T4 are products in which a ø12 mm shaft is attached to a free camera platform with tripod threads (nominal size 1/4).
  · HC-T2N is a product in which a ø12 mm shaft is attached to a single-handle camera platform with tripod threads (nominal size 1/4).

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	122.14 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Irisblende

  SURUGA SEIKI

  [Features]
  · A holder with an iris diaphragm.
  · The aperture diameter is variable from ø1.5 to ø27 mm.
  · Rotate the aperture-adjustment knob (shared with the clamp) to fix.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	209.89 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Schraubring

  SURUGA SEIKI

  A threaded ring for fixing lenses and mirrors. Note that even when the diameters are the same, the shapes can differ depending on the product. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	8.95 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Gleithalterung für Objektiv

  SURUGA SEIKI

  [Features]
  · Used for fixing round/square lenses or cylindrical/rectangular items of any size.
  · The attachment and detachment of elements is done by loosening the slide-clamp screw on the side surface, adjusting the position and, after fixing the screws, fixing the element using the clamp screw on the top.
  · The F44 can hold cylindrical elements such as lenses, while the F45 is suitable for fixing rectangular elements such as cylindrical lenses.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	104.36 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Variable Stiftlochhalterungen

  SURUGA SEIKI

  The rotating disc features eight small-diameter holes of different sizes every 45°. Positioning for each hole is done by a click-stop method. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	172.40 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kleine dünne Y-Schiene

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A Y type aluminum rail.
  · Carriers (the C-211(- 1)P and C-211(- 2)P) can be used for X type rails as is.
  · Can be used with a lower optical axis than X types.
  · The spacing between the M6 counterbore holes for attaching to surface plates is 100 mm.
  · With a lever type magnet stand mounted using the M4 counterbore holes, it is possible to magnetically attach and fix to surface plates, etc.
  · Includes memory with scale.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	347.90 €
  Minimum Lieferzeit ：	20 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  LD-Halterung (To-Paket-Modell)

  SURUGA SEIKI

  [Features]
  · A To-Package type LD holder with a built-in Peltier element.
  · Features a built-in Peltier element, and a calibrated 10kΩ thermistor sensor.
  · Supports LD sizes of ø5.6 (Pin PCD, 2.0) and ø9.0 (Pin PCD, 2.54) for three-pins and for four-pins respectively.
  · For common anodes and common cathodes, etc., configure by replacing the jumper pins.
  · For connectors, a D-sub9 pin female is used for driving the LD, and a D-sub9 pin male is used for the temperature controller.
  · The F129-1 water cooling adapter is also available.
  · Use a low temperature circulating water tank or similar to enable greater stabilization and for even lower temperatures.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	665.13 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Sensor / Laser-Halter

  SURUGA SEIKI

  [Features]
  · Can adjust the tilt angle of small sensors and laser pointers.
  · P.C.D.32 tapped holes are included on the holder surface. Uses these to mount various types of adapter plate.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	142.67 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Strahllenkungshalter

  SURUGA SEIKI

  [Features]
  · Types in which only the upper mirror is movable and types in which both the upper and lower mirrors are movable are available.
  · The pitch of the adjustment screw can be selected from 0.5 mm and 0.25 mm.
  · Adhesive fixing and three-point support fixing types are available for the mirror.
  · The lower side of the pole is an M16P (= 1 mm) male screw.
  · Can be fixed to magnetic bases and plates, etc.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	301.20 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Objektivhalter

  SURUGA SEIKI

  Used for fixing circular items such as lenses, mirrors, and filters etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	52.13 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Laser-Halter Rund

  SURUGA SEIKI

  [Features]
  · F20 sandwiches the laser between three screws. The optical axis is adjusted by screwing in and out.
  · With F21, in addition to the function of F20, it is possible to adjust in the θy direction by operating the screw at the bottom of the holder.
  · Both F20 and F21 have two types, L=150 and 250, depending on the length of the laser.
  · The included standard rod has a diameter of ø20 and a length of 60, but both the rod diameter and length can be changed upon request.
  · The laser holding part can be fixed to positions at 50 mm intervals by removing the fixing screw from the bottom (only F20-150/250).
  · The F20 can be attached directly to the breadboard (A65) by removing the rod.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	145.58 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Koaxialer Objektivhalter

  SURUGA SEIKI

  A holder that can fix lenses of any diameter and always keep the center of the held lens constant. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	171.35 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Adapter für Objektivlinse

  SURUGA SEIKI

  Used by attaching to various types of cross motion holder.
  
  [Features]
  · An adapter for objective lenses.
  · Used by attaching to various types of cross motion holder.
  · The objective lens is fixed by screwing in.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	40.34 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kompaktmodell Spiegelhalter von oben bedienbar

  SURUGA SEIKI

  [Features]
  · A small top operated mirror holder with excellent stability and operability.
  · Can hold small mirrors up to ø30. The tilt can be adjusted in the two axes.
  · The tilt axis can be locked using the included lock nut.
  · The mirror can be fixed using either adhesive or via the three-point support method.
  · Types with a rod and types without a rod are available.
  · With the three-point support type, mirrors from ø20 to ø30 mm can be fixed by replacing the pins on two of the points.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	152.33 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Filterhalter mit Blattfeder

  SURUGA SEIKI

  [Features]
  · A holder for holding square and round filters.
  · Can be fitted with up to four filters with external diameters of ø50 mm.
  · Filters are fixed by inserting them from the top whereupon the leaf spring will push them against the reference surface.
  · As the tilt of the filter (even when replacing them) remains constant in relation to the optical axis, the optical axis will not shift dramatically.
  · The filters will not abut against each other.
  · The filter-contacting portion of the leaf spring is made of resin.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	133.52 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Rechteckiger Spiegel-Halter

  SURUGA SEIKI

  [Features]
  · A holder for fixing square mirrors, filters, and projection plates, etc.
  · Fix by tightening the two screws.
  · The holder is for fixing purposes only.
  · The holder is available with a width of 60 mm or 100 mm.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	68.67 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Spiegelhalter mit hoher Stabilität

  SURUGA SEIKI

  A product that is ideal for applications where a high level of precision and alignment is necessary, or where stability and operability are important. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	152.38 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Rillenform-Halter

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A holder for mirrors and charts, etc. Insert the corresponding item into the groove and fix in place with a clamp screw.
  · Duracon® is inserted at the tip of the clamp screw and a fluoropolymer sheet is attached to the other side in order to avoid scratching of the clamped item.
  "Duracon®" is a registered trademark of Polyplastics Co., Ltd. in Japan and other countries.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	67.44 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  X-Typ Schienenständer

  CHUO PRECISION INDUSTRIAL

  [Features]
  · An X type aluminum rail.
  · Slides using a dedicated carrier.
  · Dedicated carriers (the C-211-(1)P and C-211-(2)P) can also be used for Y type rails as is.
  · Includes memory with scale.
  · Various stands and stages can be attached to the dedicated carriers (X type carriers C-211-(1)P and C-211-(2)P) using M16P1 screws and M4 screws, etc.
  · X type rails can be fixed and retained using rail stands or T type carriers.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	236.73 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kipp- / Drehhalterung für Kameras B

  CHUO PRECISION INDUSTRIAL

  [Features]
  · IR-CB Tilting/Rotating Camera Holder B can be used to hold square shaped cameras up to 30 mm in size. It features dual-axis tilt adjustment and single-axis rotation adjustment capabilities.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	339.14 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  3-Achsen-Objektivhalter

  SURUGA SEIKI

  [Features]
  · The B11-40C is employed for the X-axis while the optical axis is configured at 45 mm.
  · Replace the lens and/or adapter to allow for use in different types of application.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	589.47 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  5-Achsen-Objektivhalter

  SURUGA SEIKI

  Replace the lens and/or adapter to allow for use in different types of application. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	713.22 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  LD-Halterung

  SURUGA SEIKI

  F511L: fixed type. F512L, F513L: YZ axis adjustable LD holder. Select according to the number of pins and the pin pitch (pin P.C.D.) of the LD.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	122.44 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  LD-Halterung (Chip Carrier-Modell)

  SURUGA SEIKI

  [Features]
  · A Chip Carrier type LD holder with a built-in Peltier element.
  · Features a built-in Peltier element, and a calibrated 10kΩ thermistor sensor.
  · The switching for the anode/cathode of the LD can be configured by replacing the jumper pins.
  · There are two types of Chip Carrier LD holder. Configure according to the mounting (output) direction of the LD.
  · For connectors, a D-sub9 pin female is used for driving the LD, and a D-sub9 pin male is used for the temperature controller.
  · The F129-1 water cooling adapter is also available.
  · Use a low temperature circulating water tank or similar to enable greater stabilization and for even lower temperatures.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	665.13 €
  Minimum Lieferzeit ：	11 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Isolieradapter

  SURUGA SEIKI

  Can be used for optical system constructions. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	149.52 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Polarisatorhalter mit Neigung

  SURUGA SEIKI

  A holder that can retain items such as polarizing plates and wave plates. It can also rotate (θx) and tilt them (θy, θz). Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	573.01 €
  Minimum Lieferzeit ：	11 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Ausrichtungsziel

  SURUGA SEIKI

  Can be used for optical system constructions.
  
  [Features]
  · Used for adjusting the optical axis when building an optical system for the Opt Station.
  · Push-down the large target-fixing pin to fix to the tapped hole on the plate board.
  · Return the pin upward to install in any position.
  · The mark on the target is adjusted to a height of 45 mm.
  · Target stickers (black cross on a white base / white cross on a black base) are included.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	135.93 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kamerahalter / F119

  SURUGA SEIKI

  A holder for fixing cameras, CCD cameras, and vidicon cameras, etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	116.03 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Adapter für Steckverbinder

  SURUGA SEIKI

  [Features]
  · An adapter for optical fiber connectors.
  · An FC type receptacle is included as standard, so please select according to the connector.
  · The FC type receptacle is designed so that when a connector is inserted, the end surface of the ferrule extends about 0.5 mm from the receptacle surface. Ideal for placing in close proximity to other items.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	107.33 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Adapter für Kollimationslinse

  SURUGA SEIKI

  An adapter for holding ø4 to ø14.5 mm cylindrical items such as collimating lenses, etc. Used by attaching to various types of cross motion holder. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	61.25 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kardanisch aufgehängter Spiegelhalter

  SURUGA SEIKI

  A holder for fixing items such as mirrors or plate beam splitters etc. The tilt can be adjusted in the two axial directions. The center of rotation and the center of the mirror always coincide when making fine adjustments.
  
  [Features]
  ■ F50, F55
  · Holders for fixing mirrors, plate beam splitters, and lenses, etc. The tilt (θy, θz) can be finely adjusted.
  · Fine movement of ±4° to 6° is possible, in both θy and θz, by tightening the clamp. Loosening the clamp, allows for coarse movement (adjustment) over 360°.
  · A gimbal structure in which the center of rotation and the center of the mirror always coincide when making fine or coarse adjustments.
  · The included standard rod is ø 20, and has a length of 60 mm. However the rod length can be changed. The holder's screw holes are M6P = 1. A40 to A42 rods can be used.
  · Mirror Holder F50: For the feeding method, A-type micrometer heads and an E-type screw system are available.
  · Horizontally operated type mirror holder F55: Due to the unique horizontal operation method (the operation system is installed in a horizontal direction), the user can operate it without going in front of the optical axis with their hands. A proximity specification is also available.
  ■ F52
  · A holder for fixing mirrors, plate beam splitters, and lenses, etc. The tilt (θy, θz) can be finely adjusted in the two axial directions.
  · The tilt (θy, θz) of the two axes can be finely adjusted by ±2° or ±3° (F52).
  · A gimbal structure in which the center of rotation and the center of the mirror always coincide when making fine or coarse adjustments.
  · Items such as mirrors are attached and removed using a threaded ring. Includes a resin protective ring.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	211.15 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  SELFOC-Adapter für Objektiv

  SURUGA SEIKI

  An adapter for holding cylindrical items. Used by setting on to fixed type holders and various types of cross motion holder. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	113.99 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Sensor-Adapter

  SURUGA SEIKI

  [Features]
  · An adapter for holding round sensors and lasers.
  · The adapter thickness has been set to 12 mm, increasing the holding force.
  · Specify the ø diameter when ordering.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	68.19 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Power-Meter-Halter

  SURUGA SEIKI

  [Features]
  · A holder for fixing commercially available power meter sensors.
  · Mainly for fixing rectangular power meter sensors. Constructed so that the sensor will not shift, even when the sensor cable is pulled.
  · Fixing is done using a method of sandwiching with screws from the top.
  · Sensors that can be fixed are of limited availability.
  · Can be directly mounted onto bases with the rods removed.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	138.13 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Stiftloch-Halter

  SURUGA SEIKI

  [Features]
  · Capable of fixing pinholes and moving them in micro-movement increments in the YZ axis direction.
  · Pin holes with an external diameter of ø16 mm can be used.
  · Fix pin holes with an M20P = 0.5 threaded ring.
  · The optical axis central height is standardized at 25 mm from the bottom.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	398.97 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Adapter für Stiftloch

  SURUGA SEIKI

  Used by attaching to various types of cross motion holder. The applicable diameter of the pin hole is ø16 mm. Attachment and detachment is carried out using a threaded ring system. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	54.47 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Adapter-Klemmring

  SURUGA SEIKI

  An adapter for holding ferrules. Can hold fibers with not only ferrules but also those with SELFOC lenses, etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	81.62 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Prismenträger

  SURUGA SEIKI

  [Features]
  · Configured so that the optical axis height is at the center of the element when the element is 20 mm, and standardized at 25 mm from the bottom.
  · Move the upper sliding part to fix the prism.
  · Use the upper knob to fix without having to move the element.
  · The F551-20 bottom plate features M4 tapped holes. Mount a rod to change to a rod type.
  · F552-20 can be finely adjusted.
  · The elements are positioned using the pins in the three locations.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	103.31 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Stange mit Platte

  SURUGA SEIKI

  [Features]
  · Can be fitted with 40 mm stages and holders for Opt Stations, etc.
  · Can be arranged as needed and mounted to cross clamps, etc.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	54.30 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Spiegelhalter

  SURUGA SEIKI

  An affordable mirror holder for fixing items such as mirrors or plate beam splitters. The tilt can be finely adjusted in the two axial directions. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	124.96 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Spiegelhalter (Schlitzklemme)

  SURUGA SEIKI

  A mirror holder with a slit-clamp type lock. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	152.33 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Spiegelhalter (optische Achse 25 mm)

  SURUGA SEIKI

  A mirror holder with an optical axis height of 25 mm. For use with the Opt Station. Select the most appropriate mounting method so that the held element does not distort when mounted. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	114.16 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Ringschlüssel / A92

  SURUGA SEIKI

  A ring wrench for tightening threaded rings. Variable types and fixed types are available in sizes to fit different ring diameters. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	86.59 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Adapter für Objektiv

  SURUGA SEIKI

  An adapter for lenses with an outer diameter of ø10 mm, ø12.7 mm, ø15 mm, ø20 mm, and ø25.4 mm. Used by attaching to various types o cross motion holder.
  
  [Features]
  · Used by attaching to various types of cross motion holder. Various types of single lens.
  · Lens attachment and detachment is carried out using a threaded ring system.
  Note: Includes threaded rings and resin rings.
  Note: A ring wrench for tightening threaded rings.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	53.73 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Spiegelhalter von oben betrieben

  SURUGA SEIKI

  A top operated mirror holder with excellent stability and operability. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	228.59 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...