YANASE Räder mit Schaft
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
- Empfehlung
Baumwoll-Polierrad mit Welle
YANASE
Ideal for mirror-finish machining after machining with a sisal wheel
[Features]
· Detailed final touches of the mirrored finish.
· Alumina oxide permeated type.
· For finish polishing before using a felt disc.
· Ideal for mirror finishing.
· Finish after sisal wheel machining will be even more beautifulab∗ ： 17.02 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Biegsame Welle 1
YANASE
[Features]
· Collet chuck type, for φ3/φ6.
· Easily usable in places where work is difficult or processes which have poor work efficiency in conventional factories, leading to improved production.
· Compared to heavy electric tools and pneumatic tools, it is lighter, easier to use, and greatly reduces fatigue.ab∗ ： 151.40 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 3.47 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Biegsame Welle 2
YANASE
[Features]
· A drill chuck type that can be used with up to φ8.
· Easily usable in places where work is difficult or processes which have poor work efficiency in conventional factories, leading to improved production.
· Compared to heavy electric tools and pneumatic tools, it is lighter, easier to use, and greatly reduces fatigue.ab∗ ： 88.36 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Polierkörper, pilzförmig
YANASE
Ideal for finishing rounded mirror surfaces.
[Features]
· Mushroom shape fits firmly to any rounded surface for polishing.
· For finishing rounded mirror surfaces. Use by applying an abrasive.ab∗ ： 11.80 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Filz-Polierstift imprägniert
YANASE
The product is permeated with alumina oxide, so it can be used as is.ab∗ ： 11.92 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Fächerschleifer
YANASE
A product which can polish both bottom and side surfaces at the same time.
[Features]
· The tip (bottom) can also be used for added convenience.
· Polishing cloth extends further than the shaft so the bottom and sides can be used for 2 surface simultaneous polishing.
· Unlikely to clog, allowing a uniform finish to be achieved throughout.
· It is elastic, easy to fit to the workpiece.
· Due to heat dissipation, it does not alter the polished material.
· Excellent autogenous properties.
· Ideal for polishing flat surfaces, bottom surfaces and cornersab∗ ： 13.21 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Flanell-Polierrad
YANASE
Use for the final wiping of a mirrored surface finish.
[Features]
· For the final wiping of mirrored surface work.
· Alumina oxide permeated type.
· Use for final finishing.
· Provides a further beautiful finish.ab∗ ： 16.39 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Fächerschleifer mit Welle
YANASE
High-quality standard products that come in a vast variety of sizes and grain sizes.
[Features]
· A wide range of sizes and particle sizes with high quality.
· Because of the slight gap between polishing cloths, it is unlikely to clog and can be used for uniform polishing throughout.
· It is elastic, so that it fits nicely onto the workpiece for close polishing.
· It is not exothermic and does not alter the polished material.
· Fits well to workpiece.
· Boasts significant autogenous action.ab∗ ： 5.72 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Nylon-Polierrad (hart)
YANASE
Ideal for removal of scratches and rust. Can also be used for hairline finishing.
[Features]
· Selectable from abundant granularity and sizes.
· It removes burrs without scraping, with no secondary burrs.
· As it is soft, elastic and has good adaptability, it prevents fatigue.ab∗ ： 9.84 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Polierkopf mit kleinem Durchmesser
YANASE
Various materials are available, such as cotton, chamois, flannel, muslin, wool, emery, hemp, etc.ab∗ ： 7.30 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Nylon-Rad mit Welle
YANASE
Prevents over-scraping, and produces a uniform finished surface with no clogging.
[Features]
· Unilon's standard product.
· Because the Unilon fibers are specially coated with abrasive, the intertwined fibers play the role of cushioning and prevent excessive grinding.
· Its autogenous properties prevent clogging.
· Polishes without scratching.
· Finishes the surface without scraping the material.
· Flexible and fits perfectly to the curved surfaces.ab∗ ： 14.95 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Sisal-Polierrad mit Welle
YANASE
Ideal for pre-polishing polish with a cotton wheel.
[Features]
· For semi-finishing of mirror finishing.
· Alumina oxide permeated type.
· Finishing and polishing of stainless steel, aluminum and other materials.
· For scorch removal.
· For polishing before a mirror finish.
· Ideal for polishing prior to cotton wheel polishingab∗ ： 21.30 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Fächerschleifer aus Filz FF
YANASE
Felt buff processed into flap shape for less clogging and burning.
[Features]
· For polishing and wiping with soft contact.
· Felt sheet cut into smaller pieces and processed into a flap shape for less clogging and burning.
· Use with application of abrasive.ab∗ ： 10.66 € Minimum Lieferzeit ： 11 Arbeitstage *Stückpreis Standardkonfiguration
-
Polierhülse
YANASE
Use alundum for general polishing and zirconia for heavy polishing such as bead polishing, etc. after welding.ab∗ ： 1.23 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Polierhülsenhalter
YANASE
Since the holder part is a sponge, the contact is soft, and prevents excessive grinding.
[Features]
· Attachment when using a cushioning cone.
· Superb elasticity with the dedicated sponge.ab∗ ： 14.29 € Minimum Lieferzeit ： 8 Arbeitstage *Stückpreis Standardkonfiguration
-
Fächerschleifer mit Welle, einfach austauschbar
YANASE
[Features]
· This is the product you always wanted.
· The centrifugal force caused by rotation increases the diameter, making it ideal for inner surface polishing.
· Capable of heavy polishing with a soft touch.
· It is a retractable type, providing a large polishing area and beautiful finished surface.
· One-touch shaft attachmentab∗ ： 3.07 € Minimum Lieferzeit ： 8 Arbeitstage *Stückpreis Standardkonfiguration
-
Fächerschleifer mit Welle
YANASE
[Features]
· Because of the slight gap between polishing cloths, it is unlikely to clog and can be used for uniform polishing throughout.
· It is elastic, so that it fits nicely onto the workpiece for close polishing.
· It is not exothermic and does not alter the polished material.
· Fits well to workpiece.
· Boasts significant autogenous action.ab∗ ： 6.32 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit ： |
| Application |
| Type |
| Material |
| Outer Diameter(mm) |
| Width(mm) |
| Shaft Diameter(mm) |
| Particle Size(#) |
| Stationary Diameter(mm) |
| Screw Hole Diameter(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE |
| Artikelserie | ||||||||||||||||||
| ab∗ | 17.02 € *Stückpreis Standardkonfiguration | 151.40 € *Stückpreis Standardkonfiguration | 3.47 € *Stückpreis Standardkonfiguration | 88.36 € *Stückpreis Standardkonfiguration | 11.80 € *Stückpreis Standardkonfiguration | 11.92 € *Stückpreis Standardkonfiguration | 13.21 € *Stückpreis Standardkonfiguration | 16.39 € *Stückpreis Standardkonfiguration | 5.72 € *Stückpreis Standardkonfiguration | 9.84 € *Stückpreis Standardkonfiguration | 7.30 € *Stückpreis Standardkonfiguration | 14.95 € *Stückpreis Standardkonfiguration | 21.30 € *Stückpreis Standardkonfiguration | 10.66 € *Stückpreis Standardkonfiguration | 1.23 € *Stückpreis Standardkonfiguration | 14.29 € *Stückpreis Standardkonfiguration | 3.07 € *Stückpreis Standardkonfiguration | 6.32 € *Stückpreis Standardkonfiguration |
| Minimum Lieferzeit ： | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 6 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 11 Arbeitstage | 5 Arbeitstage | 8 Arbeitstage | 8 Arbeitstage | 5 Arbeitstage |
| Application | Poliert | Poliert | Poliert | Poliert | Poliert | Poliert | Poliert | Poliert | Poliert | Poliert | Poliert | Poliert | Poliert | Poliert | Poliert | Poliert | Poliert | Poliert |
| Type | - | - | - | - | - | - | Klappe mit Welle | - | Klappe mit Welle | Klappe mit Welle | - | Klappe mit Welle | - | - | Papier | Halter | Klappe mit Welle | Klappe mit Welle |
| Material | Baumwolle | - | Filz | - | Polieren | Filz | - | Flanell | - | - | Polieren | - | Sisal | Filz | - | - | - | - |
| Outer Diameter(mm) | 30 ～ 80 | - | 4 ～ 50 | - | 50 | 6 | 10 ～ 25 | 30 ～ 80 | 10 ～ 30 | 10 ～ 25 | 20 ～ 25 | 50 ～ 100 | 30 ～ 80 | 60 | - | Tip diameter ø14; Large end diameter φ20 | 10 ～ 25 | 10 ～ 40 |
| Width(mm) | 25 | - | 5 ～ 25 | - | 20 | 15 | 20 ～ 25 | 25 | 5 ～ 25 | 13 ～ 25 | 3 ～ 15 | 25 | 25 | 25 | - | 50 | 10 ～ 25 | 10 ～ 30 |
| Shaft Diameter(mm) | 6 | - | 3 ～ 6 | - | 6 | 3 | 3 ～ 6 | 6 | 3 | 3 ～ 6 | 3 | 6 | 6 | 6 | - | 6 | - | 3 ～ 6 |
| Particle Size(#) | - | - | - | - | - | - | 60 ～ 100 | - | 80 ～ 600 | 600 ～ 1500 | - | 120 ～ 600 | - | - | 80 ～ 150 | - | 60 ～ 240 | 40 ～ 600 |
| Stationary Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Screw Hole Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3 ～ 6 | - |
Loading...
Filtern nach:
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Application
-
Type
- Klappe mit Welle
- Band
- Schleifbandkörper
- Papier
- Halter
-
Material
-
Outer Diameter(mm)
- 2.1
- 3
- 4
- 5
- 6
- 6.1
- 7
- 8
- 8–13
- 8.1
- 9
- 9.5
- 10
- 11
- 12
- 12.1
- 12.7
- 13
- 14
- Tip diameter ø14; Large end diameter φ20
- 15
- 15.1
- 17
- 19
- 19.1
- 20
- 21
- 22
- 22.1
- 23.8
- 25
- 25.1
- 25.4
- 28
- 30
- 30.1
- 38
- 40
- 45
- 50
- 60
- 75
- 80
- 100
-
Width(mm)
-
Shaft Diameter(mm)
-
Particle Size(#)
-
Stationary Diameter(mm)
-
Screw Hole Diameter(mm)
Suchergebnisse durch Herstellerauswahl einschränken
-
- MISUMI (7)
- ICHIGUCHI (30)
- TRUSCO NAKAYAMA (23)
- YANASE (18)
- MINITOR (9)
- DREMEL (4)
- MURAKO (4)
- NAKANISHI (4)
- OFFICE MINE (3)
- SUMFLEX (3)
- H & H (1)
- NIHON SEIMITSU KIKAI KOSAKU (1)
- NEWREGISTON (1)
- UHT (1)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Räder mit Schaft
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.