Leitungsschläuche（Eigenschaften：Wärmebeständigkeit）

?* Informationen zur Lieferzeit und Preisen

• 

  Hitzebeständiger / verschleißfester Spiralschlauch Superplus T KTR

  TOYO TIRE & RUBBER

  ▪ Inner layer is rubber with excellent abrasion resistance. It is lightweight and very flexible. Easy to handle and has excellent workability. Conductive rubber is used, therefore it has an excellent anti-static effect. Excellent durability, resistance to weather, and ozone crack resistance. Small bend radius, hard to form winding deformation., can be used under a wide range of temperatures from -30°C to 100°C.

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  Minimum Lieferzeit ：	7 Arbeitstage

• 

  Wärmebeständige Spiralschläuche / Für Heißlufterzeuger

  MISUMI

  [Merkmale] Ein hitzebeständiger Kanalschlauch. -Schneideservice ist verfügbar.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  Minimum Lieferzeit ：	7 Arbeitstage

• 

  TAC Hitzebeständiges Rohr IT-13 (Freie Rohrleitung)

  TOTAKU INDUSTRIES

  [Features]
  - Duct formed with aluminum polyester cloth and zinc-plated steel. Supports temperatures of 130°C or below.
  - Uses special laminated film to reduce particles created by surface friction.
  - Flexible and easy to store/transport.

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	137.93 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Leitungsschlauch, Schlauch N.S.D.

  KANAFLEX CORPORATION

  The weight of the duct has been successfully reduced by 40% compared to conventional PVC ducts. A smooth inner surface design with increased ventilation and exhaust efficiency. This product has excellent antistatic effectiveness with a heat-resistance performance to prevent deformation at high temperatures.
  
  [Features]
  · The NSD duct provides a 40% weight reduction compared to conventional PVC ducts.
  · Easy to carry to increase work efficiency.
  · The inner surface of the NSD duct has been smoothed to a smoothness that is equivalent to PVC duct with increased ventilation and exhaust efficiency.
  · In a heat-test experiment, the NSD and PVC ducts were secured into a U-shape inside a constant-temperature room. The temperature inside the room was gradually increased. The PVC duct deformed at 60℃, whereas the NSD duct did not.
  · The NSD duct is a hose that has an antistatic effect due to antistatic agents that have been incorporated into the hose material.

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  Minimum Lieferzeit ：	10 Arbeitstage

• 

  Leitungsschlauch, Harter Schlauch N.S.

  KANAFLEX CORPORATION

  [Features]
  · PVC Product.
  · Excellent heat resistance.
  · Structure has less bends due to temperature change.
  · Flexible bendable hose.
  · At least 10% lighter than existing hard ducts.
  · Up to 50% elastic so as not to damage the airtightness.
  · Aperture will change just by twisting the opening of the duct.
  · Can be easily cut with a knife, and can be connected by just inserting the opening of the duct and wreathing with tape.
  · Cutting and mounting are easy and piping work can be performed easily.

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  Minimum Lieferzeit ：	56 Arbeitstage

• 

  Leitungsschlauch, AR-Ausführung,

  KANAFLEX CORPORATION

  [Features]
  · Offers excellent abrasion resistance compared to PVC-type duct hoses.
  · Excellent cold resistance and heat resistance (operating temperature range: 30°C to 80°C).
  · This is a high-quality duct hose with effective conductivity (anti-static).
  · Since it does not curl easily, the treatment becomes very simple.
  · This hose adapts quickly to the temperature of the work environment, and does not develop ozone cracks (fissures) like those in existing hoses.
  · Cutting and mounting are easy and piping work can be performed easily.

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  Minimum Lieferzeit ：	16 Arbeitstage

• 

  TAC Aluminiumleitung

  TOTAKU INDUSTRIES

  For ventilator ducts and air conditioning in housing, apartments, stores, etc. Flexible, bendable piping for easy use in narrow spaces. Can be shortened to around 1/5 of its original length for compact storage.
  
  [Features]
  · Superior in terms of flexibility and bending properties, so it can be laid in narrow spaces.
  · TAC Duct Aluminum can be compressed to 1/5 of its original length, while TAC Duct Aluminum 2 can be compressed to 1/10 of its original length, allowing compact, space-saving storage.
  · Repeatedly bendable. Excellent heat resistance (up to 80°C)

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  Minimum Lieferzeit ：	9 Arbeitstage

• 

  TAC Helanleitung

  TOTAKU INDUSTRIES

  Duct hose with 2 times the wear resistance of TAC ducting (according to internally conducted testing). Superior cold and heat resistance and anti-static properties. Duct hose not easily subject to ozone cracking.
  
  [Features]
  Is wear resistant and has superior cold and heat resistance (operating temperature range is -30°C to 80°C).
  · Duct hose with superior anti-static properties (material volume resistivity/105 Ω-cm or less).
  · Duct hose resistant to ozone cracking that can occurs in conventional rubber hoses

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  Minimum Lieferzeit ：	9 Arbeitstage

• 

  TAC Hitzebeständiges Rohr MD-18 (Befestigte Rohrleitungen)

  TOTAKU INDUSTRIES

  [Features]
  · A reinforcing core of galvanized steel sheeting, glass cloth and aluminum foil is used, making possible use at temperatures of 180°C or lower.
  · Flexible and easy to store and transport (avoid repeated expansion and contraction)
  · The aluminum glass cloth sheeting used is highly flame-resistant (Flameproof Grade 1).

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  Minimum Lieferzeit ：	9 Arbeitstage

• 

  TAC Hitzebeständiges Rohr MD-25 (Freie Rohrleitung)

  TOTAKU INDUSTRIES

  [Features]
  · Uses specially coated glass cloth and a stainless steel plate (SUS304) reinforcing core, and can be used at 250°C or below.
  · Flexible and easy to store and transport.
  · The specially coated glass cloth used for the product has excellent flame retardant properties (product passed level 1 fireproofing testing)

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  Minimum Lieferzeit ：	9 Arbeitstage

• 

  TAC Hitzebeständiges Rohr MD-45 (Befestigte Rohrleitungen)

  TOTAKU INDUSTRIES

  [Features]
  · All of components used are made of stainless steel (SUS304), have superior heat resistance performance, and can be used at 450°C or below.
  · The materials are not prone to corrosion even from gases containing acids, alkaline substances, solvents, etc.
  · This product is designed for fixed piping, but it is also possible to create bends (repeated bending is not supported).

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  Minimum Lieferzeit ：	10 Arbeitstage

• 

  Ti-Kanalschlauch für abriebfestes GL-Modell.

  TIGERS POLYMER

  A tie duct hose GL type hose with superior wear resistance that can be used at a wide range of temperatures from -30°C to 80°C. Also has an anti-static effect.
  
  [Features]
  · Has superior wear resistance and can be used in a wide variety of temperatures (approximately -30°C to 80°C).
  Has superior conductivity and a static band prevention effect.
  · Has superior weather resistance.
  · Suited to the transport of powders and granular material, dust collection, and feeding high temperature exhaust.

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  Minimum Lieferzeit ：	10 Arbeitstage

• 

  Flexibler Schlauch AP-Ausführung

  TIGERS POLYMER

  Flexible and lightweight hose with an allowable continuous service temperature of 100℃ and below. Airtight.
  
  [Features]
  ･ Heat-resistant flexible hose made from olefin resin and aluminum foil from a special laminating process.
  ･ The special laminated aluminum foil is inserted in an inner-outer surface of an olefin resin for superior airtightness.
  · Flexible, lightweight with superior workability.
  · The allowable continuous service temperature is 100˚C or less

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	91.76 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Flexibler Schlauch V-Ausführung PAL-Ausführung

  TIGERS POLYMER

  Lightweight and telescopes freely, can be used continuously at a temperature of 130°C or less.
  
  [Features]
  Flexible hose for heat resistance configured from special laminated aluminum foil and a zinc-plated steel plate.
  Because it is lightweight and telescopes freely, it is easy to stow, store, and transport.
  · The allowable continuous operating temperature is 130˚C or less.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	70.53 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Flexibler Schlauch V-Ausführung AG-Ausführung

  TIGERS POLYMER

  Lightweight and with excellent flame and heat resistance. The material used for the product is a flameproof grade 1 material as stipulated in JIS A 1322. The continuous operating temperature is up to 180°C.
  
  [Features]
  · Heat resistant flexible hose made of specially laminated aluminum foil, glass cloth, and galvanized steel plate.
  · Lightweight and with excellent flame and heat resistance.
  · The continuous operating temperature is up to 180˚C.
  · The aluminum and the glass cloth sheet are flameproof grade 1 materials as stipulated in JIS A1322.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	118.25 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Flexibler Schlauch V-Ausführung FP-Ausführung

  TIGERS POLYMER

  The hose is flexible and the material used for the product is a flameproof Grade 1 material as stipulated in JIS A 1322.
  
  [Features]
  · Made of special coating glass cloth and stainless steel plate (SUS304).
  · Easy to stow, store and transport because it can be extended or retracted as and when required.
  · The allowable continuous operating temperature is 250°C or less.
  · Can be used at higher temperatures than PAL, AG types.
  · The material used, which is a specially coated glass cloth, is a flameproof Grade 1 materials as per JISA1322.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	237.29 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Flexibler Schlauch V-Ausführung SUS Ausführung

  TIGERS POLYMER

  Uses all stainless steel (SUS304). Continuous operating temperature of up to 400℃.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	116.37 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Silikon-Luftschlauch SRDH TS-Ausführung / GS-Ausführung

  TIGERS POLYMER

  This duct hose is airtight and heat resistant (150 - 200 °C). It can be used in temperatures as low as -50°C.

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	173.51 €
  Minimum Lieferzeit ：	13 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  TiFlex Typ NH-1

  TIGERS POLYMER

  Excellent expansion/contraction, bending, and thermal insulation. Non-combustible material certified by the Japan Ministry of Land, Infrastructure, Transport and Tourism.

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  Minimum Lieferzeit ：	10 Arbeitstage

• 

  Leitungsschlauch Fujin

  ORIENT CORPORATION

  Glass fiber reinforced aluminum metalized film is used as a surface material. Product features superior fire resistance and cracks will not spread even when the product is damaged. Furthermore, air leakage is prevented by the inner surface material, even when the outer surface material is damaged.
  
  [Features]
  · Glass fiber reinforced aluminum metalized film is used as a surface material, so the product features fire resistance which is superior to standard resin jackets and cracks will not spread even when the product is heavily damaged.
  · A polyethylene terephthalate film is used for the inner surface material, so no air leakage from the inside occurs and air leakage is prevented even when the outside surface material is damaged.
  · Additionally, moisture does not pass through, so this product can also be used to transfer humidified air.
  · The entire body is covered with spiral-shaped steel wire, so the product maintains its shape and static pressure loss is prevented.
  · The product can be cut to the required length, so custom on-site sizing is possible.
  · Features good construction efficiency, so overall cost reduction can be achieved by significantly reducing work time.

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	96.09 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Leitungsschlauch Goku

  ORIENT CORPORATION

  The Goku is lightweight, its 3 layers of aluminum foil and narrow-pitch high carbon steel wires machined with unique technology. Flexible to all specific on-site construction demands; its composition ensures it won't lose its shape.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	60.65 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  O-FLEX TUBE CA-Serie

  OHTSUKA

  [Features]
  • Heat resistance with continuous 250°C , 1h 250°C .
  • Vibration resistance.
  · Compressive strength 200N or higher

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	133.68 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...