Koaxialstecker（paßender Sift / Kontakt：Buchse (Buchse)）
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
Koaxialstecker Serie BNC
YUETSU SEIKI
The BNC connector features a bayonet lock connection system that can be easily attached and detached. It is utilized in a wide range of communication and measurement applications. Nominal impedance = 50 Ω.
[Features]
· BNC connector is a connector with a bayonet lock connection system that is easy to attach and detach. The connector is available with a nominal impedance of 50 Ω and 75 Ω (BNCC type).
· The cable length is also very adaptable for use in a wide range of communication and measurement applications.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 4.19 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
MMCX-Steckverbinder
HIROSE ELECTRONIC
The MMCX connector is a small push-on lock coaxial connector.
[Features]
· Simple push-on format used for easy insertion and extraction.
· Able to load PCMCIA type II cards: MMCX-LR-SMT (40) have a thickness of 3.51 mm and can be loaded to the back side of type II cards.
· Moreover, if a 0.36 mm degree of eccentricity from the central card line is used when mounting a card on the circuit board mounting surface, the central card axis and central connector axis will be aligned.
· Ultra-thin cable compatibility: RG type high frequency coaxial cable... RG-178B/U (⌀1.8), ... RG-316/U (⌀2.59MAX), ⌀1.48 (single layer shield) fluorine resin coaxial cable, ⌀1.32 (double layer shield) ultra-thin fluoride resin coaxial cable, ⌀1.13 (single layer shield) ultra-thin fluoride resin coaxial cable, ⌀1.37 (single layer shield) ultra-thin fluoride resin coaxial cable.
· Dual terminal connection with other series: Capable of dual terminal connection with U.FL, N, BNC, HRM, and TNC series.
· Highly coordinated: high frequency traits are realized with a voltage standing wave ratio (V.S.W.R.) of less than 1.2 at a frequency of up to DC 6 GHz (possessing representative value and not compatible with all products).
・Compatibility: the opening is standard, allowing for mating with MMCX connectors.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 6.90 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
BNC-Steckverbinder
HIROSE ELECTRONIC
Coaxial connector and BNC connector can be used with a wide variety of devices. · There is a rich selection of product types.
[Features]
・The most common 50Ø-type cable: BNC series is the most widely used 50Ø cable (there is also the 75Ø type).
・Bayonet lock for quick attachment and detachment: bayonet lock mechanism for easy attachment and detachment.
・Applicable cables: complete coaxial cables with an outer diameter of Ø3 - Ø8 (RG-55・58/U, etc.)
・Applicable regulations: Japan Defense Agency (DSPC6202).
▪ Japanese Industrial Regulations (JISC5412): based on MIL regulations.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 4.09 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
SMA-Steckverbinder Serie HRM
HIROSE ELECTRONIC
This is a MIL standard coaxial connector, SMA connector. We were the first company to successfully develop this . With high reliability and different variations, it is used with a wide range of equipment.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 4.06 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Koaxialstecker Serie SMA
YUETSU SEIKI
The SMA coaxial connector is a compact, high-performance connector for microwaves. The SMA connector demonstrates superior performance, with excellent reliability, stability, and mechanical characteristics. It can be used at frequencies ranging up to DC–18 GHz.
[Features]
· The SMA coaxial connector is a compact, high-performance connector for microwaves. The SMA connector demonstrates superior performance, with excellent reliability, stability, and mechanical characteristics.
· It can be used at frequencies ranging up to DC–18 GHz. However, a model is also available that can be used for particularly high frequencies up to 25 GHz.
· We offer compatible cables, including semi-rigid cables, semi-flexible cables, and flexible cables for supporting a wide variety of applications.
· Available in both standard and affordable items depending on the type of body material and surface treatment.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 7.43 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Koaxialstecker Serie SMB
YUETSU SEIKI
[Features]
▪ The SMB connector is a compact connector featuring a snap-on/ pull-off attachment system, and can be utilized in frequencies ranging up to DC 4 GHz.
▪ The SMB series is suitable for applications such as GPS, mobile communications, and wireless LAM.
▪ Straight, L-angle, connectors for ultra-thin flexible cables, connectors for semi-rigid cables, and more are available.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 4.22 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Koaxialstecker Ausführung C05 – Serie UM
HIROSE ELECTRONIC
This is a quick-lock type coaxial connector. · There is a rich selection of product types.
[Features]
· Optimized for ultra-thin coaxial cables: ultra-small coaxial connector optimized for ultra-thin coaxial cables with high reliability.
· Lock system: The lock system is the quick lock type system.
· The quick lock type is regulated by Japan Defense Agency Standard DSPC6205.
· Connection system: The connection system is the extremely easy-to-use and reliable crimp attachment system.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 4.41 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Koaxialschalter (DC – 6 GHz) für kleine Schnittstellen mit 3,9 mm Höhe
HIROSE ELECTRONIC
An ultra-small coaxial switch with a mount height of 3.9 mm. Can also be used as an external antenna connector in addition to circuit checking.
[Features]
· Low insertion losses: 1 GHz TYP when not mated. 0.08 dB 2GHz TYP. Low insertion losses of 0.10 dB.
· Space saving: The outer dimensions are 5.8 mm x 5.4 mm to save space.
· Low profile: Working towards profile with height of 3.9mm.
· Lightweight: Lightweight, weighing 0.11g.
· Long life: a life span of 12,000 insertions and extractions.
· Supports automatic mounting: embossed tape allows for automatic mounting.
· Wide range of use, corresponds to up to DC 6 GHz: Usable with frequencies up to DC 6 GHz.
・Lead free: both the receptacle and plug are lead free out of consideration for environmental issues.
・Furthermore, the construction takes flux oozing into consideration.
· Self alignment: ±0.5 mm guide amount when mating with plug.› Jetzt konfigurierenab∗ ： 0.64 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kleiner Koaxialstecker mit Schiebe-Schnappverschluss, Serie MSS
HIROSE ELECTRONIC
Utilizing a slide snap lock method, both the internal and external conductors are in almost perfect contact, providing excellent durability. There are two types of wiring methods used: crimp wire connection and screw clamps. Compliant with Japan Defense Agency DSPC-6206.
[Features]
• The Japan Defense Agency has enacted a specifications document: DSPC-6206.
• Every aspect of performance for mid-size connectors is specifically demonstrated, and although the size is exceedingly miniaturized, performance is comparable to mid-sized high frequency connectors.
• A slide snap locking system is utilized within the external conductor, and this conductor has near complete contact and also demonstrates excellent vibration resistance.
• Wire connection work can be conducted in a thoroughly simplified and assured manner using one of these two methods: the crimp wire connection method or the screw clamp method.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 5.54 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Serie CN-6-J
SATO PARTS
[Features]
▪ Receptacle part of CN-6. Safe and reliable product made in Japan.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 14.50 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
CN-7017-J
SATO PARTS
[Features]
▪ Receptacle part of CN-7017.
▪ This is a product which is the same as CN-5-J, CN-7041-J, and CN-7042-J and it is reliable because it is made in Japan.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 11.53 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Koaxialstecker Form TNC – Serie TNC
HIROSE ELECTRONIC
A small, locking type screw coupling coaxial connector. This connector is optimally suited to connecting to mobile radio equipment antennas due to its mechanical robustness.
[Features]
· 1. Mechanically robust due to center locking contact.
· 2. The center wire is connected by solder and the outer wires are connected by crimped terminal connectors.
· 3. Optimally suited to connecting to mobile radio equipment antennas.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 14.77 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Koaxialstecker Ausführung 75 Ω SMB, Serie 27CP
FUJIKURA (DDK)
[Features]
· The 27CP series of connectors correspond to a 75 Ω version of the 27DP series of connectors (50 Ω type).
· This connector, which is representative of small 75 Ω connectors, is frequently used in applications such as interfaces inside devices.
· The push-on method makes it easy to connect or disconnect.
· This part is not compatible with the 27DP series.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 16.14 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Koaxialstecker Ausführung SMB, Serie 27DP
FUJIKURA (DDK)
Connectors are made to be compliant with the SMB type defined in MIL-PRF-39012. Can be used for miniaturization and increasing the density of communications equipment
[Features]
• The 27DP series correspond to connectors made to be compliant with the SMB (Sub-Miniature Type B) type defined in MIL-PRF-39012.
· A 50 Ω connector for fine cabling that enables miniaturization and increased density of communications equipment.
• The coupling mechanism is push-on, and cables are mounted by crimping or soldering.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 11.53 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Serie 31 – BNC-isolierte Steckhülsen (Ausführung für Plattenmontage)
FUJIKURA (DDK)
[Features]
• These insulated receptacles are panel mounted and connected to BNC series (plug) connectors.
· Reliable insulation is achieved between the external conductor of the connector and the panel.
▪ The ground terminal is connected to the external conductor and integrated with the mold adjacent to the central conductor. Hence, it is easy to handle.
• The round-pin contact types (31-10-CF and 31-10-CAu-CF) are UL-listed (UL File No. E72124).- Mengenrabatt
› Jetzt konfigurierenab∗ ： 5.70 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Serie BNC-RD – BNC-isolierte Steckhülse (Ausführung für Montage auf Platine)
FUJIKURA (DDK)
[Features]
·This insulated receptacle is a printed circuit board mounting type that mates with the BNC series (plugs).
·Reliable insulation achieved between the external conductor of the connector and the panel.
▪ The ground terminal is connected to the external conductor and integrated with the mold adjacent to the central conductor. Hence, it is easy to handle.
·As a VA product, this receptacle's contact uses sound or shape (press contact).
·The receptacle can be mounted on a printed circuit board either vertically or horizontally.
·The height from the printed circuit board is low, at 14.0 mm when the receptacle is mounted horizontally on the printed circuit board.
· The product can be used in an extensive range of applications, including computers, communication devices, and medical devices.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 12.34 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Serie BNC – Koaxialstecker Ausführung BNC
FUJIKURA (DDK)
[Features]
• BNC series connectors are used in a wide range of products as 50-Ω coaxial connectors.
• Compact and lightweight, these connectors are often used as interfaces, particularly for equipment that is frequently mounted and dismounted, thanks to their easily coupled and disengaged bayonet lock connection mechanism.
• If you use 75-Ω cables, use these connectors at frequencies of 200 MHz or less.
• When exceeding 200 MHz, use BNC75 series connectors.
• BNC and BNC75 series connectors are interchangeable.- Mengenrabatt
- 2D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 7.81 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Koaxialstecker Ausführung N, Serie N
FUJIKURA (DDK)
[Features]
• The N series are 50 Ù-type 7-mm coaxial connectors (inner diameter of outer conductor) with an excellent track record.
• A wide variety is offered to fit various types of cable.
(Note): This is not compatible with the NC series (75-Ω series), so please be careful.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 29.10 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
BNC-Steckverbinderhülse
TO-CONNE
[Features]
· Small and light weight using a bayonet locking method for simple coupling. Receptacles.
▪ When a 75 Ω cable is used with a 50 Ω type connector, and the frequency is 200 MHz or less, it can be used on a 75 Ω transmission line, but when the frequency exceeds 200 MHz, use of a BNC 75 Ω type is recommended.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 7.92 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Isolierte Steckhülse BNC-Steckverbinder
TO-CONNE
[Features]
· Small and light weight using a bayonet locking method for simple coupling. Insulated receptacle.
▪ When a 75 Ω cable is used with a 50 Ω type connector, and the frequency is 200 MHz or less, it can be used on a 75 Ω transmission line, but when the frequency exceeds 200 MHz, use of a BNC 75 Ω type is recommended.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 4.49 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
SMA-Steckverbinderhülse
TO-CONNE
[Features]
· A high performance compact connector for microwaves which is usable over a wide frequency range, and features superior durability.
· The body is made of stainless steel but less expensive brass is also available- Mengenrabatt
› Jetzt konfigurierenab∗ ： 9.66 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckhülsen für SMB-Steckverbinder-PCB
TO-CONNE
[Features]
· High frequency-compatible connector wherein the connection method used is a push on method primarily designed for size and weight reduction of equipment- Mengenrabatt
› Jetzt konfigurierenab∗ ： 6.96 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| CAD |
| ab∗ |
| Minimum Lieferzeit |
| Steckerform |
| A· B· C |
| D· E· F |
| G·H·I |
| M·N·O |
| S· T· U |
| Anzahl |
| paßender Sift / Kontakt |
| Anzahl der Adern |
| Anwendung |
| Zulässiger Strom(A) |
| Zulässige Spannung(V) |
| Verdrahtungsverfahren |
| Anschlussrichtung |
| Schutzfunktion (umweltbeständig) |
| Impedanz(Ω) |
| Repräsentativer Standard |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | YUETSU SEIKI | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | YUETSU SEIKI | YUETSU SEIKI | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | SATO PARTS | SATO PARTS | HIROSE ELECTRONIC | FUJIKURA (DDK) | FUJIKURA (DDK) | FUJIKURA (DDK) | FUJIKURA (DDK) | FUJIKURA (DDK) | FUJIKURA (DDK) | TO-CONNE | TO-CONNE | TO-CONNE | TO-CONNE |
| Artikelserie | Koaxialschalter (DC – 6 GHz) für kleine Schnittstellen mit 3,9 mm Höhe | Kleiner Koaxialstecker mit Schiebe-Schnappverschluss, Serie MSS | Serie 31 – BNC-isolierte Steckhülsen (Ausführung für Plattenmontage) | Serie BNC-RD – BNC-isolierte Steckhülse (Ausführung für Montage auf Platine) | ||||||||||||||||||
| CAD |
| |||||||||||||||||||||
| ab∗ | 4.19 € *Stückpreis Standardkonfiguration Mengenrabatt | 6.90 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.09 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.06 € *Stückpreis Standardkonfiguration Mengenrabatt | 7.43 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.22 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.41 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.64 € *Stückpreis Standardkonfiguration | 5.54 € *Stückpreis Standardkonfiguration Mengenrabatt | 14.50 € *Stückpreis Standardkonfiguration Mengenrabatt | 11.53 € *Stückpreis Standardkonfiguration Mengenrabatt | 14.77 € *Stückpreis Standardkonfiguration Mengenrabatt | 16.14 € *Stückpreis Standardkonfiguration Mengenrabatt | 11.53 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.70 € *Stückpreis Standardkonfiguration Mengenrabatt | 12.34 € *Stückpreis Standardkonfiguration Mengenrabatt | 7.81 € *Stückpreis Standardkonfiguration Mengenrabatt | 29.10 € *Stückpreis Standardkonfiguration Mengenrabatt | 7.92 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.49 € *Stückpreis Standardkonfiguration | 9.66 € *Stückpreis Standardkonfiguration Mengenrabatt | 6.96 € *Stückpreis Standardkonfiguration Mengenrabatt |
| Minimum Lieferzeit | 5 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 6 Arbeitstage | 5 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | Versand am selben Tag | 5 Arbeitstage | 5 Arbeitstage |
| Steckerform | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial |
| A· B· C | BNC | - | BNC | - | - | - | - | - | - | Sonstige | Sonstige | - | - | - | - | Sonstige | BNC | - | BNC | BNC | - | - |
| D· E· F | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| G·H·I | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| M·N·O | - | Sonstige | - | - | - | - | - | MS | Sonstige | - | - | - | - | - | - | - | - | N | - | - | - | - |
| S· T· U | - | - | - | SMA | SMA | SMB | Sonstige | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - | SMA | SMB |
| Anzahl | - | - | - | - | - | - | - | - | - | - | - | - | Sonstige | Sonstige | Sonstige | - | - | - | - | - | - | - |
| paßender Sift / Kontakt | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) |
| Anzahl der Adern | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | - | - | - | - | - | - | 1 | 1 | 1 | 1 |
| Anwendung | Kabelanschluss / Für Leiterplatten / Plattenmontagen / Sonstige | Für Leiterplatten | Kabelanschluss / Für Leiterplatten / Plattenmontagen / Sonstige | Für Leiterplatten / Plattenmontagen | Kabelanschluss / Für Leiterplatten / Plattenmontagen / Sonstige | Kabelanschluss | Kabelanschluss / Für Leiterplatten | Für Leiterplatten | Kabelanschluss / Für Leiterplatten / Plattenmontagen | Kabelanschluss | Kabelanschluss | Kabelanschluss | Für Leiterplatten | Kabelanschluss / Für Leiterplatten | Plattenmontagen | Für Leiterplatten | Kabelanschluss / Plattenmontagen | Plattenmontagen | Plattenmontagen | Plattenmontagen | Für Leiterplatten / Plattenmontagen | Für Leiterplatten |
| Zulässiger Strom(A) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Zulässige Spannung(V) | 500 | - | - | 330 | 335 | 335 | 150 ～ AC 150 Vrms | - | AC 150 Vrms | - | - | AC 150 Vrms | - | - | - | - | - | - | 500 | 500 | 500 | 500 |
| Verdrahtungsverfahren | Crimp / Sonstige | Sonstige | Lötmittel | Lötmittel | Crimp | Lötmittel / Crimp | Lötmittel | - | Lötmittel | Lötmittel | Lötmittel | Lötmittel | - | Crimp | - | - | Lötmittel | - | - | - | - | - |
| Anschlussrichtung | Gerade / Sonstige | Gerade / Winkel | Gerade / Winkel / Sonstige | Gerade / Winkel | Gerade / Sonstige | Gerade / Winkel | Gerade / Winkel | Gerade | Gerade / Winkel | Gerade | Gerade | Gerade | Winkel | Gerade / Winkel | Gerade | Winkel | Gerade | Gerade | Gerade / Winkel | Gerade | Gerade | Gerade / Winkel |
| Schutzfunktion (umweltbeständig) | N/A | - | N/A | - | N/A | N/A | - | - | - | N/A | N/A | N/A | - | - | - | - | - | - | N/A | N/A | N/A | N/A |
| Impedanz(Ω) | 50 / Sonstige | 50 | 50 / 75 | 50 | 50 | 50 | 50 | 50 | 50 | - | - | 50 | 75 | 50 | Sonstige | Sonstige | 50 | 50 | 50 | 50 | 50 | 50 |
| Repräsentativer Standard | - | - | - | - | - | - | - | - | - | - | - | - | - | - | UL | - | - | - | - | - | - | - |
Loading...
Filtern nach:
Lagerbestand
-
- Nur Lagerteile anzeigen
-
Steckerform
- Koaxial
-
A· B· C
- BNC
- Sonstige
-
D· E· F
- Sonstige
-
G·H·I
- Sonstige
-
M·N·O
- MS
- N
- Sonstige
-
S· T· U
- SMA
- SMB
- Sonstige
-
Anzahl
- Sonstige
-
paßender Sift / Kontakt
- Stecker (Stecker)
- Buchse (Buchse)
- Kombination mit Stecker/Buchse
- Sonstige
-
Anzahl der Adern
-
Anwendung
-
Zulässiger Strom(A)
-
Zulässige Spannung(V)
-
Verdrahtungsverfahren
- Lötmittel
- Crimp
- Sonstige
-
Anschlussrichtung
- Gerade
- Winkel
- Sonstige
-
Schutzfunktion (umweltbeständig)
-
Impedanz(Ω)
- 50
- 75
- Sonstige
-
Repräsentativer Standard
Marke
-
- HIROSE ELECTRONIC (7)
- FUJIKURA (DDK) (6)
- TO-CONNE (4)
- YUETSU SEIKI (3)
- SATO PARTS (2)
- KNIPEX (0)
- HUBER+SUHNER (0)
- DENSAN (0)
- KASH (0)
- ECON CONNECT (0)
- BKL ELECTRONIC (0)
- CLIFF (0)
- TAJIMI ELECTRONICS (0)
- PHOENIX CONTACT (0)
- NEUTRIK (0)
- TRU COMPONENTS (0)
CAD Format
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Koaxialstecker
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.