- Hinweis auf planmäßige Wartung: Diese Seite wird auf Grund von Wartungsarbeiten in der Zeit von 3:00 26/5/2024 bis 1:00 (CET) 27/5/2024 nicht verfügbar sein. Wir entschuldigen uns vielmals für die Unannehmlichkeiten.
Halter für optische Geräte
Suche durch Präzisierung der Kategorie der unteren Klasse
Spiegelhalter
Querbewegungshalter
Querbewegungsadapter
Objektivhalter
Polarisatorenhalter
Prismenhalter
Filterhalter
Stiftbohrungen, Membranen
Laserhalter- Feste Halter, Halterzubehör
Optische Stationseinheiten
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
Kamerahalterung
CHUO PRECISION INDUSTRIAL
[Features]
· HC-T3 and HC-T4 are products in which a ø12 mm shaft is attached to a free camera platform with tripod threads (nominal size 1/4).
· HC-T2N is a product in which a ø12 mm shaft is attached to a single-handle camera platform with tripod threads (nominal size 1/4).- 2D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 115.67 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Schraubring
SURUGA SEIKI
A threaded ring for fixing lenses and mirrors. Note that even when the diameters are the same, the shapes can differ depending on the product. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.- Mengenrabatt
- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 8.95 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Kleine dünne Y-Schiene
CHUO PRECISION INDUSTRIAL
[Features]
· A Y type aluminum rail.
· Carriers (the C-211(- 1)P and C-211(- 2)P) can be used for X type rails as is.
· Can be used with a lower optical axis than X types.
· The spacing between the M6 counterbore holes for attaching to surface plates is 100 mm.
· With a lever type magnet stand mounted using the M4 counterbore holes, it is possible to magnetically attach and fix to surface plates, etc.
· Includes memory with scale.- 2D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 329.51 € Minimum Lieferzeit ： 20 Arbeitstage *Stückpreis Standardkonfiguration
-
Irisblende
SURUGA SEIKI
[Features]
· A holder with an iris diaphragm.
· The aperture diameter is variable from ø1.5 to ø27 mm.
· Rotate the aperture-adjustment knob (shared with the clamp) to fix.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 209.89 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Kardanisch aufgehängter Spiegelhalter
SURUGA SEIKI
A holder for fixing items such as mirrors or plate beam splitters etc. The tilt can be adjusted in the two axial directions. The center of rotation and the center of the mirror always coincide when making fine adjustments.
[Features]
■ F50, F55
· Holders for fixing mirrors, plate beam splitters, and lenses, etc. The tilt (θy, θz) can be finely adjusted.
· Fine movement of ±4° to 6° is possible, in both θy and θz, by tightening the clamp. Loosening the clamp, allows for coarse movement (adjustment) over 360°.
· A gimbal structure in which the center of rotation and the center of the mirror always coincide when making fine or coarse adjustments.
· The included standard rod is ø 20, and has a length of 60 mm. However the rod length can be changed. The holder's screw holes are M6P = 1. A40 to A42 rods can be used.
· Mirror Holder F50: For the feeding method, A-type micrometer heads and an E-type screw system are available.
· Horizontally operated type mirror holder F55: Due to the unique horizontal operation method (the operation system is installed in a horizontal direction), the user can operate it without going in front of the optical axis with their hands. A proximity specification is also available.
■ F52
· A holder for fixing mirrors, plate beam splitters, and lenses, etc. The tilt (θy, θz) can be finely adjusted in the two axial directions.
· The tilt (θy, θz) of the two axes can be finely adjusted by ±2° or ±3° (F52).
· A gimbal structure in which the center of rotation and the center of the mirror always coincide when making fine or coarse adjustments.
· Items such as mirrors are attached and removed using a threaded ring. Includes a resin protective ring.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 199.99 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
Variable Stiftlochhalterungen
SURUGA SEIKI
The rotating disc features eight small-diameter holes of different sizes every 45°. Positioning for each hole is done by a click-stop method. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 163.27 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Spiegelhalter mit hoher Stabilität
SURUGA SEIKI
A product that is ideal for applications where a high level of precision and alignment is necessary, or where stability and operability are important. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 144.31 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
Zylindrischer Linsenhalter
CHUO PRECISION INDUSTRIAL
[Features]
· A lens holder with a groove for fixing cylindrical lenses.- 2D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 115.53 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
LD-Halterung (To-Paket-Modell)
SURUGA SEIKI
[Features]
· A To-Package type LD holder with a built-in Peltier element.
· Features a built-in Peltier element, and a calibrated 10kΩ thermistor sensor.
· Supports LD sizes of ø5.6 (Pin PCD, 2.0) and ø9.0 (Pin PCD, 2.54) for three-pins and for four-pins respectively.
· For common anodes and common cathodes, etc., configure by replacing the jumper pins.
· For connectors, a D-sub9 pin female is used for driving the LD, and a D-sub9 pin male is used for the temperature controller.
· The F129-1 water cooling adapter is also available.
· Use a low temperature circulating water tank or similar to enable greater stabilization and for even lower temperatures.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 629.95 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Gleithalterung für Objektiv
SURUGA SEIKI
[Features]
· Used for fixing round/square lenses or cylindrical/rectangular items of any size.
· The attachment and detachment of elements is done by loosening the slide-clamp screw on the side surface, adjusting the position and, after fixing the screws, fixing the element using the clamp screw on the top.
· The F44 can hold cylindrical elements such as lenses, while the F45 is suitable for fixing rectangular elements such as cylindrical lenses.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 104.36 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Sensor / Laser-Halter
SURUGA SEIKI
[Features]
· Can adjust the tilt angle of small sensors and laser pointers.
· P.C.D.32 tapped holes are included on the holder surface. Uses these to mount various types of adapter plate.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 135.13 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
Objektivhalter
SURUGA SEIKI
Used for fixing circular items such as lenses, mirrors, and filters etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 49.38 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Laser-Halter Rund
SURUGA SEIKI
[Features]
· F20 sandwiches the laser between three screws. The optical axis is adjusted by screwing in and out.
· With F21, in addition to the function of F20, it is possible to adjust in the θy direction by operating the screw at the bottom of the holder.
· Both F20 and F21 have two types, L=150 and 250, depending on the length of the laser.
· The included standard rod has a diameter of ø20 and a length of 60, but both the rod diameter and length can be changed upon request.
· The laser holding part can be fixed to positions at 50 mm intervals by removing the fixing screw from the bottom (only F20-150/250).
· The F20 can be attached directly to the breadboard (A65) by removing the rod.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 137.88 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Koaxialer Objektivhalter
SURUGA SEIKI
A holder that can fix lenses of any diameter and always keep the center of the held lens constant. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 162.29 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Adapter für Objektivlinse
SURUGA SEIKI
Used by attaching to various types of cross motion holder.
[Features]
· An adapter for objective lenses.
· Used by attaching to various types of cross motion holder.
· The objective lens is fixed by screwing in.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 38.20 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Kompaktmodell Spiegelhalter (mit Sperre)
SURUGA SEIKI
[Features]
· A holder for holding small mirrors up to ø30 mm. The tilt (θy, θz) can be adjusted in the two axes.
· Adhesive type and three-point support type fixing are available for the mirror fixing methods.
· With the rod-less type, M3 or M6 screws are used for fixing.
· With the three-point support type (F58N-30-2), mirrors from ø20 to 30 mm can be held by changing the position of the lower supporting pin.
· The fine tilt-adjustment knob is P = 0.5 mm and can be fixed to a set incline with a lock nut.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 108.53 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Feinbewegung und Spiegelhalter in kompakter Ausführung (mit Sperre)
SURUGA SEIKI
[Features]
· The FM58 with an added tilt-lock nut.
· Adhesive type and three-point support type fixing are available for the mirror fixing methods.
· Both the adhesive and screw types are available with or without a rod.
· With the rod-less type, M3 or M6 screws are used for fixing.
· With the three-point support type, mirrors from ø20 to ø30 mm can be fixed by replacing the pins on two of the points.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 108.48 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Filterhalter mit Blattfeder
SURUGA SEIKI
[Features]
· A holder for holding square and round filters.
· Can be fitted with up to four filters with external diameters of ø50 mm.
· Filters are fixed by inserting them from the top whereupon the leaf spring will push them against the reference surface.
· As the tilt of the filter (even when replacing them) remains constant in relation to the optical axis, the optical axis will not shift dramatically.
· The filters will not abut against each other.
· The filter-contacting portion of the leaf spring is made of resin.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 126.45 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
Spiegelhalter mit hoher Leistung (optische Achse: 25 mm)
SURUGA SEIKI
[Features]
· A compact version of the FM532.
· Designed with an optical axis height of 25 mm. For use with the Opt Station.
· A product that is ideal for applications where a high level of precision and alignment is necessary, or where stability and operability are important.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 117.16 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Ringschlüssel / MHZ
CHUO PRECISION INDUSTRIAL
[Features]
· A ring wrench that uses bits.
· Can be used with products that have slits in the press ring such as adapters, mirror holders, and lens holders.
· The MHZ-1 is a fixed bit type. The range of use for the MHZ-2 can be increased by changing the position of the bit.- 2D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 38.36 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
X-Typ Schienenständer
CHUO PRECISION INDUSTRIAL
[Features]
· An X type aluminum rail.
· Slides using a dedicated carrier.
· Dedicated carriers (the C-211-(1)P and C-211-(2)P) can also be used for Y type rails as is.
· Includes memory with scale.
· Various stands and stages can be attached to the dedicated carriers (X type carriers C-211-(1)P and C-211-(2)P) using M16P1 screws and M4 screws, etc.
· X type rails can be fixed and retained using rail stands or T type carriers.- 2D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 224.21 € Minimum Lieferzeit ： 8 Arbeitstage *Stückpreis Standardkonfiguration
-
Kipp- / Drehhalterung für kleine Laser
CHUO PRECISION INDUSTRIAL
[Features]
· The IR-CL tilting/rotating laser holder is a laser holder that can be used for mounting small semiconductor lasers and base lasers. It also features dual-axis tilt adjustment and single-axis rotation adjustment capabilities to facilitate optical axis alignment.› Jetzt konfigurierenab∗ ： 321.20 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
3-Achsen-Objektivhalter
SURUGA SEIKI
[Features]
· The B11-40C is employed for the X-axis while the optical axis is configured at 45 mm.
· Replace the lens and/or adapter to allow for use in different types of application.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 558.28 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
5-Achsen-Objektivhalter
SURUGA SEIKI
Replace the lens and/or adapter to allow for use in different types of application. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 675.51 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
LD-Halterung
SURUGA SEIKI
F511L: fixed type. F512L, F513L: YZ axis adjustable LD holder. Select according to the number of pins and the pin pitch (pin P.C.D.) of the LD.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 115.95 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
LD-Halterung (Chip Carrier-Modell)
SURUGA SEIKI
[Features]
· A Chip Carrier type LD holder with a built-in Peltier element.
· Features a built-in Peltier element, and a calibrated 10kΩ thermistor sensor.
· The switching for the anode/cathode of the LD can be configured by replacing the jumper pins.
· There are two types of Chip Carrier LD holder. Configure according to the mounting (output) direction of the LD.
· For connectors, a D-sub9 pin female is used for driving the LD, and a D-sub9 pin male is used for the temperature controller.
· The F129-1 water cooling adapter is also available.
· Use a low temperature circulating water tank or similar to enable greater stabilization and for even lower temperatures.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 629.95 € Minimum Lieferzeit ： 11 Arbeitstage *Stückpreis Standardkonfiguration
-
Isolieradapter
SURUGA SEIKI
Can be used for optical system constructions. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.› Jetzt konfigurierenab∗ ： 141.61 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
Polarisatorhalter mit Neigung
SURUGA SEIKI
A holder that can retain items such as polarizing plates and wave plates. It can also rotate (θx) and tilt them (θy, θz). Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 542.70 € Minimum Lieferzeit ： 11 Arbeitstage *Stückpreis Standardkonfiguration
-
Ausrichtungsziel
SURUGA SEIKI
Can be used for optical system constructions.
[Features]
· Used for adjusting the optical axis when building an optical system for the Opt Station.
· Push-down the large target-fixing pin to fix to the tapped hole on the plate board.
· Return the pin upward to install in any position.
· The mark on the target is adjusted to a height of 45 mm.
· Target stickers (black cross on a white base / white cross on a black base) are included.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 128.74 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
Kamerahalter / F119
SURUGA SEIKI
A holder for fixing cameras, CCD cameras, and vidicon cameras, etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 109.88 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Adapter für Steckverbinder
SURUGA SEIKI
[Features]
· An adapter for optical fiber connectors.
· An FC type receptacle is included as standard, so please select according to the connector.
· The FC type receptacle is designed so that when a connector is inserted, the end surface of the ferrule extends about 0.5 mm from the receptacle surface. Ideal for placing in close proximity to other items.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 101.65 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Adapter für Kollimationslinse
SURUGA SEIKI
An adapter for holding ø4 to ø14.5 mm cylindrical items such as collimating lenses, etc. Used by attaching to various types of cross motion holder. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.› Jetzt konfigurierenab∗ ： 58.01 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
SELFOC-Adapter für Objektiv
SURUGA SEIKI
An adapter for holding cylindrical items. Used by setting on to fixed type holders and various types of cross motion holder. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 107.97 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
Sensor-Adapter
SURUGA SEIKI
[Features]
· An adapter for holding round sensors and lasers.
· The adapter thickness has been set to 12 mm, increasing the holding force.
· Specify the ø diameter when ordering.› Jetzt konfigurierenab∗ ： 64.60 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
Power-Meter-Halter
SURUGA SEIKI
[Features]
· A holder for fixing commercially available power meter sensors.
· Mainly for fixing rectangular power meter sensors. Constructed so that the sensor will not shift, even when the sensor cable is pulled.
· Fixing is done using a method of sandwiching with screws from the top.
· Sensors that can be fixed are of limited availability.
· Can be directly mounted onto bases with the rods removed.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 130.83 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Strahllenkungshalter
SURUGA SEIKI
[Features]
· Types in which only the upper mirror is movable and types in which both the upper and lower mirrors are movable are available.
· The pitch of the adjustment screw can be selected from 0.5 mm and 0.25 mm.
· Adhesive fixing and three-point support fixing types are available for the mirror.
· The lower side of the pole is an M16P (= 1 mm) male screw.
· Can be fixed to magnetic bases and plates, etc.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 285.26 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Stiftloch-Halter
SURUGA SEIKI
[Features]
· Capable of fixing pinholes and moving them in micro-movement increments in the YZ axis direction.
· Pin holes with an external diameter of ø16 mm can be used.
· Fix pin holes with an M20P = 0.5 threaded ring.
· The optical axis central height is standardized at 25 mm from the bottom.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 377.86 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
Adapter für Stiftloch
SURUGA SEIKI
Used by attaching to various types of cross motion holder. The applicable diameter of the pin hole is ø16 mm. Attachment and detachment is carried out using a threaded ring system. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 51.59 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
Adapter-Klemmring
SURUGA SEIKI
An adapter for holding ferrules. Can hold fibers with not only ferrules but also those with SELFOC lenses, etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.- 2D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 77.30 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
Prismenträger
SURUGA SEIKI
[Features]
· Configured so that the optical axis height is at the center of the element when the element is 20 mm, and standardized at 25 mm from the bottom.
· Move the upper sliding part to fix the prism.
· Use the upper knob to fix without having to move the element.
· The F551-20 bottom plate features M4 tapped holes. Mount a rod to change to a rod type.
· F552-20 can be finely adjusted.
· The elements are positioned using the pins in the three locations.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 103.31 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Stange mit Platte
SURUGA SEIKI
[Features]
· Can be fitted with 40 mm stages and holders for Opt Stations, etc.
· Can be arranged as needed and mounted to cross clamps, etc.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 48.56 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Spiegelhalter
SURUGA SEIKI
An affordable mirror holder for fixing items such as mirrors or plate beam splitters. The tilt can be finely adjusted in the two axial directions. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 118.35 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Spiegelhalter (Schlitzklemme)
SURUGA SEIKI
A mirror holder with a slit-clamp type lock. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 144.27 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
Spiegelhalter (optische Achse 25 mm)
SURUGA SEIKI
A mirror holder with an optical axis height of 25 mm. For use with the Opt Station. Select the most appropriate mounting method so that the held element does not distort when mounted. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 108.12 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Ringschlüssel / A92
SURUGA SEIKI
A ring wrench for tightening threaded rings. Variable types and fixed types are available in sizes to fit different ring diameters. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.- 2D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 82.01 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| CAD |
| ab∗ |
| Minimum Lieferzeit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | CHUO PRECISION INDUSTRIAL | SURUGA SEIKI | CHUO PRECISION INDUSTRIAL | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | CHUO PRECISION INDUSTRIAL | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | CHUO PRECISION INDUSTRIAL | CHUO PRECISION INDUSTRIAL | CHUO PRECISION INDUSTRIAL | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI |
| Artikelserie | Feinbewegung und Spiegelhalter in kompakter Ausführung (mit Sperre) | ||||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
| ab∗ | 115.67 € *Stückpreis Standardkonfiguration | 8.95 € *Stückpreis Standardkonfiguration Mengenrabatt | 329.51 € *Stückpreis Standardkonfiguration | 209.89 € *Stückpreis Standardkonfiguration | 199.99 € *Stückpreis Standardkonfiguration | 163.27 € *Stückpreis Standardkonfiguration | 144.31 € *Stückpreis Standardkonfiguration | 115.53 € *Stückpreis Standardkonfiguration | 629.95 € *Stückpreis Standardkonfiguration | 104.36 € *Stückpreis Standardkonfiguration | 135.13 € *Stückpreis Standardkonfiguration | 49.38 € *Stückpreis Standardkonfiguration | 137.88 € *Stückpreis Standardkonfiguration | 162.29 € *Stückpreis Standardkonfiguration | 38.20 € *Stückpreis Standardkonfiguration | 108.53 € *Stückpreis Standardkonfiguration | 108.48 € *Stückpreis Standardkonfiguration | 126.45 € *Stückpreis Standardkonfiguration | 117.16 € *Stückpreis Standardkonfiguration | 38.36 € *Stückpreis Standardkonfiguration | 224.21 € *Stückpreis Standardkonfiguration | 321.20 € *Stückpreis Standardkonfiguration | 558.28 € *Stückpreis Standardkonfiguration | 675.51 € *Stückpreis Standardkonfiguration | 115.95 € *Stückpreis Standardkonfiguration | 629.95 € *Stückpreis Standardkonfiguration | 141.61 € *Stückpreis Standardkonfiguration | 542.70 € *Stückpreis Standardkonfiguration | 128.74 € *Stückpreis Standardkonfiguration | 109.88 € *Stückpreis Standardkonfiguration | 101.65 € *Stückpreis Standardkonfiguration | 58.01 € *Stückpreis Standardkonfiguration | 107.97 € *Stückpreis Standardkonfiguration | 64.60 € *Stückpreis Standardkonfiguration | 130.83 € *Stückpreis Standardkonfiguration | 285.26 € *Stückpreis Standardkonfiguration | 377.86 € *Stückpreis Standardkonfiguration | 51.59 € *Stückpreis Standardkonfiguration | 77.30 € *Stückpreis Standardkonfiguration | 103.31 € *Stückpreis Standardkonfiguration | 48.56 € *Stückpreis Standardkonfiguration | 118.35 € *Stückpreis Standardkonfiguration | 144.27 € *Stückpreis Standardkonfiguration | 108.12 € *Stückpreis Standardkonfiguration | 82.01 € *Stückpreis Standardkonfiguration |
| Minimum Lieferzeit | 5 Arbeitstage | Versand am selben Tag | 20 Arbeitstage | Versand am selben Tag | 10 Arbeitstage | 5 Arbeitstage | 10 Arbeitstage | 5 Arbeitstage | 9 Arbeitstage | 5 Arbeitstage | 10 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 9 Arbeitstage | 10 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 8 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 10 Arbeitstage | 10 Arbeitstage | 11 Arbeitstage | 10 Arbeitstage | 11 Arbeitstage | 10 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 10 Arbeitstage | 10 Arbeitstage | 10 Arbeitstage | 5 Arbeitstage | 9 Arbeitstage | 10 Arbeitstage | 10 Arbeitstage | 10 Arbeitstage | 5 Arbeitstage | 9 Arbeitstage | 6 Arbeitstage | 10 Arbeitstage | 5 Arbeitstage | 10 Arbeitstage |
Loading...
Filtern nach:
Lagerbestand
-
- Nur Lagerteile anzeigen
CAD Format
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Halter für optische Geräte
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.