S-Kopf (Hartmetall-Modularkopf) , SMSA-Modell
Modularer Kopf mit Kühlmittelbohrungen.
[Merkmale]
Er kann zum Planfräsen, Schulterfräsen (Eckenradius) und zur Bearbeitung von gekrümmten Oberflächen verwendet werden.
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | O.D. (mm) (φ) | Total number of flutes (sheet) | Effective cutting edge length (Ad) (mm) | Underneck length (ℓ1) (mm) | Shank diameter (d) (mm) | Dimension W (mm) | Dimensions r (mm) | Dimensions MD (mm) | Application/Tip Clamp Screw and Cartridge Radial Adjustment Screw Wrench | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
240.37 € | 1 | 6 Arbeitstage | 16 | 6 | 16 | 30 | 15 | 14 | 2 | M8 | Applicable wrench: DS-14/suitable torque: 10–11 N·m | ||
178.89 € | 1 | 6 Arbeitstage | 16 | 6 | 16 | 30 | 15 | 14 | 3 | M8 | Applicable wrench: DS-14/suitable torque: 10–11 N·m | ||
285.50 € | 1 | 6 Arbeitstage | 20 | 6 | 20 | 35 | 19 | 17 | 3 | M10 | Applicable wrench: DS-17/suitable torque: 10–16 N·m | ||
366.34 € | 1 | 6 Arbeitstage | 25 | 6 | 25 | 43 | 24 | 22 | 3 | M12 | Applicable wrench: DS-22/suitable torque: 15–20 N·m | ||
492.34 € | 1 | 6 Arbeitstage | 30 | 6 | 30 | 56 | 29 | 27 | 3 | M16 | Applicable wrench: DS-27/suitable torque: 20–25 N·m | ||
526.17 € | 1 | 6 Arbeitstage | 32 | 6 | 32 | 56 | 30 | 27 | 3 | M16 | Applicable wrench: DS-27/suitable torque: 20–25 N·m | ||
240.37 € | 1 | 6 Arbeitstage | 16 | 8 | 16 | 30 | 15 | 14 | 0.5 | M8 | Applicable wrench: DS-14/suitable torque: 10–11 N·m | ||
240.37 € | 1 | 6 Arbeitstage | 16 | 8 | 16 | 30 | 15 | 14 | 1 | M8 | Applicable wrench: DS-14/suitable torque: 10–11 N·m | ||
285.50 € | 1 | 6 Arbeitstage | 20 | 8 | 20 | 35 | 19 | 17 | 0.5 | M10 | Applicable wrench: DS-17/suitable torque: 10–16 N·m | ||
285.50 € | 1 | 6 Arbeitstage | 20 | 8 | 20 | 35 | 19 | 17 | 1 | M10 | Applicable wrench: DS-17/suitable torque: 10–16 N·m | ||
285.50 € | 1 | 6 Arbeitstage | 20 | 8 | 20 | 35 | 19 | 17 | 2 | M10 | Applicable wrench: DS-17/suitable torque: 10–16 N·m | ||
366.34 € | 1 | 6 Arbeitstage | 25 | 8 | 25 | 43 | 24 | 22 | 1 | M12 | Applicable wrench: DS-22/suitable torque: 15–20 N·m | ||
366.34 € | 1 | 6 Arbeitstage | 25 | 8 | 25 | 43 | 24 | 22 | 2 | M12 | Applicable wrench: DS-22/suitable torque: 15–20 N·m | ||
492.34 € | 1 | 6 Arbeitstage | 30 | 8 | 30 | 56 | 29 | 27 | 1 | M16 | Applicable wrench: DS-27/suitable torque: 20–25 N·m | ||
492.34 € | 1 | 6 Arbeitstage | 30 | 8 | 30 | 56 | 29 | 27 | 2 | M16 | Applicable wrench: DS-27/suitable torque: 20–25 N·m | ||
526.17 € | 1 | 6 Arbeitstage | 32 | 8 | 32 | 56 | 30 | 27 | 1 | M16 | Applicable wrench: DS-27/suitable torque: 20–25 N·m | ||
526.17 € | 1 | 6 Arbeitstage | 32 | 8 | 32 | 56 | 30 | 27 | 2 | M16 | Applicable wrench: DS-27/suitable torque: 20–25 N·m |
Loading...
Grundlegende Informationen
| Machining Application | Fläche / Seite / Sonstige | Finish category | Behandlung | Mounting Method | Zentrierstopfen |
|---|---|---|---|---|---|
| Type | Solid/Multi-Blade | Material type | JC8015 | With/Without Coolant Holes | Available |
| Application | Flat surface planing/shoulder grinding (corner radius)/curved surface machining |
Konfigurieren
Basiseigenschaften
-
O.D. (mm)(φ)
-
Total number of flutes(sheet)
-
Effective cutting edge length (Ad)(mm)
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Dimension W(mm)
- 14
- 17
- 22
- 27
-
Dimensions r(mm)
- 0.5
- 1
- 2
- 3
-
Ausführung
- SMSA
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 6 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.